Cisco Systems H.323 manual Subdirectory Contents

Chapter 2 Installing and Configuring Cisco HSI Software

Installing the Cisco HSI

Table 2-2 Cisco HSI Installation Information (continued)

Required Information Notes

Hardware platform

Installation location

1.VSC = virtual switch controller

2.DNS = domain name system

3.PGW = PSTN Gateway

The Cisco HSI application is distributed as a tar file (with filename GoldWing-xxxx.tar in which xxxx is the version ID, for example, GoldWing-4.1.tar) or as a CD-ROM.

The default installation directory is /opt/GoldWing. We recommend that you install the software at the default location. More than one version of the software can exist within subdirectories, for example /opt/GoldWing/4.1

Links point to the currently active version of the Cisco HSI application, as follows:

•currentPM points to the current version to use for all software except the call processing application.

•currentGW points to the version that may not be the latest version of the call processing application. (GWmain)

Table 2-3shows the subdirectories of the /opt/GoldWing/currentPM directory.

Table 2-3 CurrentPM Subdirectories

Subdirectory	Contents
./bin	All compiled executables.
./local	All scripts.
./etc	Base configuration files.
./lib	Shared libraries required by executables.
./toolkit	Toolkit files.
./var	Volatile directory that contains file locks and so on.
./var/log	Default log directory.
./var/prov	Provision system writes provisioning config files here.
./var/trace	Trace logs are written here.

Exported provisioning files are stored in /opt/GoldWing/export.

	Cisco H.323 Signaling Interface User Guide
2-4	OL-4806-01 Rev. A14