Cisco Systems H.323 manual Prov-cpy, Confirm, Usage Guidelines, Prov-add, Prov-exp

Appendix A MML User Interface and Command Reference

prov-cpy

prov-cpy

The prov-cpycommand activates the current provisioning session. If any client-level parsing fails during the prov-cpycommand, the system might prompt for confirmation to force the HSI to activate the configuration (prov-cpy[:confirm]). However, we recommend that you never use prov-cpy:confirmunless you are asked to do so by Cisco.

If client-level parsing fails, there is a severe error within the user configuration.

If the prov-cpycommand fails, use the failure description and the configuration changes to determine the error. Correct the configuration and reissue the prov-cpycommand.

Please contact the Cisco TAC if you require assistance with the configuration.

Syntax Description	confirm	If any client level parsing fails during the data session, a confirm is needed
		for the data to be activated.
Examples	The command shown in the following example copies the configuration changes from the current session
	to the Cisco HSI:
	gw mml> prov-cpy
	H323 Signaling Interface Sun Jan 7 13:53:42 2001
	M SUCC
	Successfully activated the provisioning session.
Usage Guidelines	See Chapter 3, “Provisioning the Cisco HSI,” for a list of MML names, parameter names, and their
	associated values.
Related Commands	Command	Description
	prov-add	Adds a component.
	prov-dlt	Deletes a provisioned component.
	prov-ed	Modifies a provisioned component.
	prov-exp	Exports the current configuration of the Cisco HSI in MML
		command form to a file or files.
	prov-rtrv	Retrieves information about an existing provisioning session.
	prov-sta	Establishes a provisioning session.
	prov-stp	Terminates either a specified provisioning session or the current
		provisioning session.

	Cisco H.323 Signaling Interface User Guide
A-14	OL-4806-01 Rev. A14