Cisco Systems H.323 manual Quit, Radlogfile namestart stop, Diaglog

Appendix A MML User Interface and Command Reference

quit

quit

		The quit command ends an MML session.
		quit
Syntax Description		This command has no arguments or keywords.
Examples		The command in the following example ends an MML session.
		gw mml> quit
radlog
		The radlog command starts or stops RADVision logging into a specified log file.
		radlog:[file name]:start stop
	Caution This command is processor intensive and results in very large log files. Use this command only to
		retrieve information for single test calls, and do not use it on a live network that is processing numerous
		calls.
Syntax Description.		file name	The user-defined name of the log file. The actual filename has a .log suffix.
			The file is located in the logging directory defined in the configuration data
			(see Chapter 3, “Provisioning the Cisco HSI”).
Examples		The command in the following example starts logging into a diagnostics log named file1:
		gw mml> radlog:file1:start
		H323 Signaling Interface Day Mon 1 hh:mm:ss YYYY
		M SUCC
		RADLogging requested to start
		The following command logs RADVision to the standard log file:
		gw mml> radlog::start
		H323 Signaling Interface Day Mon 1 hh:mm:ss YYYY
		M SUCC
		RADLogging to standard log file
Related Commands		Command	Description
		diaglog	Starts or stops event logging into a diagnostics log.
		rtrv-log	Displays the logging level of a package or all packages.
		set-log	Sets the logging level of a package or all packages.
			Cisco H.323 Signaling Interface User Guide
	OL-4806-01 Rev. A14			A-23