Chapter 5 Installing the IPS 4270-20

Removing and Replacing the Chassis Cover

For More Information

•For more information on working with electrical power and in an ESD environment, see Safety Recommendations, page 2-2.

•For more information on the best place to position your sensor on the network, see Your Network Topology, page 1-3.

•For the procedure for installing the IPS 4270-20 in a rack, see Installing the IPS 4270-20 in the Rack, page 5-18.

•For the instructions for setting up a terminal server, see Connecting an Appliance to a Terminal Server, page 1-22.

•For the procedure for using the setup command to initialize the IPS 4270-20, see Chapter B, “Initializing the Sensor.”.

•For the procedure for obtaining the most recent Cisco IPS software, see Obtaining Cisco IPS Software, page C-1.

•For the procedure for using HTTPS to log in to the IDM, refer to Logging In to the IDM.

•For the procedures for configuring intrusion prevention on your sensor, refer to the following guides:

–Cisco Intrusion Prevention System Device Manager Configuration Guide for IPS 7.1

–Cisco Intrusion Prevention System Manager Express Configuration Guide for IPS 7.1

–Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 7.1

Removing and Replacing the Chassis Cover

Caution Follow proper safety procedures when performing these steps by reading the safety warnings in Regulatory Compliance and Safety Information for the Cisco Intrusion Prevention System 4200 Series Appliance Sensor.

Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than 120 VAC, 20 A U.S. (240 VAC, 16-20 A International). Statement 1005

Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024

Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement 1029

 

 

Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1

 

 

 

 

 

 

OL-24002-01

 

 

5-39

 

 

 

 

 

Page 130 Page 132
Page 131
Image 131
Cisco Systems IPS4520K9 manual Removing and Replacing the Chassis Cover
Page 130 Page 132

IPS4520K9 specifications

Cisco Systems has long been a leading player in network security, and its IPS (Intrusion Prevention System) series is a testament to its commitment to safeguarding digital environments. Among its notable offerings are the IPS4510K9 and IPS4520K9 models, both designed to provide advanced threat protection for mid-sized to large enterprise networks.

The Cisco IPS4510K9 and IPS4520K9 are distinguished by their cutting-edge features that help organizations defend against a myriad of cyber threats. These systems utilize a multi-layered approach to security, integrating intrusion prevention, advanced malware protection, and comprehensive visibility across the network.

One of the primary characteristics of the IPS4510K9 is its high performance. It boasts a throughput of up to 1 Gbps, making it suitable for environments that demand rapid data processing and real-time responses to threats. The IPS4520K9, on the other hand, enhances that capability with improved throughput of up to 2 Gbps, accommodating larger enterprises with heavier network traffic. These models are equipped with powerful processors that support complex signature matching and can intelligently distinguish between legitimate traffic and potential threats.

In addition to performance, both models are designed with scalability in mind. They can be easily integrated into existing Cisco infrastructures. This facilitates a seamless enhancement of security without causing significant interruptions to ongoing operations. Moreover, they offer flexible deployment options, allowing organizations to operate them inline or out of band depending on their specific needs.

The Cisco IPS4510K9 and IPS4520K9 leverage advanced detection technologies, utilizing a variety of signature types and heuristic analysis to detect known and unknown threats effectively. They are equipped with real-time alerting and reporting capabilities, giving security teams immediate visibility into potential breaches and enabling them to respond swiftly.

Furthermore, both models support a range of management options through the Cisco Security Manager, allowing for centralized administration, streamlined policy management, and enhanced monitoring capabilities. Automated updates ensure the systems remain current with the latest threat intelligence, vital for staying ahead of evolving cyber threats.

In summary, the Cisco Systems IPS4510K9 and IPS4520K9 represent powerful solutions for organizations seeking robust intrusion prevention capabilities. With their high performance, scalability, and advanced detection technologies, these systems are essential tools in the ever-changing landscape of cybersecurity, providing enterprises with the peace of mind needed to operate securely in today's digital world.
Top Page Image Contents