Appendix D Upgrading, Downgrading, and Installing System Images

Installing System Images

Step 3 Enter enable mode.

asa# enable

Step 4 Configure the recovery settings for the ASA 5585-X IPS SSP.

asa (enable)# hw-module module 1 recover configure

Note If you make an error in the recovery configuration, use the hw-module module 1 recover stop command to stop the system reimaging and then you can correct the configuration.

Step 5 Specify the TFTP URL for the software image.

Image URL [tftp://0.0.0.0/]:

Example

Image URL [tftp://0.0.0.0/]: tftp://192.0.2.0/IPS-SSP_40-K9-sys-1.1-a-7.1-3-E4.img

Step 6 Specify the command and control interface of the ASA 5585-X IPS SSP.

Note The port IP address is the management IP address of the ASA 5585-X IPS SSP.

Port IP Address [0.0.0.0]:

Example

Port IP Address [0.0.0.0]: 10.89.149.231

Step 7 Leave the VLAN ID at 0.

VLAN ID [0]:

Step 8 Specify the default gateway of the ASA 5585-X IPS SSP.

Gateway IP Address [0.0.0.0]:

Example

Gateway IP Address [0.0.0.0]: 10.89.149.254

Step 9 Execute the recovery. This transfers the software image from the TFTP server to the

ASA 5585-X IPS SSP and restarts it.

asa# hw-module module 1 recover boot

Step 10 Periodically check the recovery until it is complete.

Note The status reads Recovery during recovery and reads Up when installation is complete.

asa# show module 1 details

Getting details from the Service Module, please wait...

ASA 5585-X IPS Security Services Processor-10 with 8GE

 

 

 

Model:

ASA5585-SSP-IPS40

 

 

 

Hardware version:

1.0

 

 

 

 

Serial Number:

JAF1350ABSL

 

 

 

Firmware version:

2.0(1)3

 

 

 

 

Software version:

7.1(3)E4

 

 

 

MAC Address Range:

8843.e12f.5414 to 8843.e12f.541f

 

 

 

Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1

 

 

 

 

D-24

 

 

OL-24002-01

 

 

 

 

 

Page 302
Image 302
Cisco Systems IPS4520K9 manual Configure the recovery settings for the ASA 5585-X IPS SSP, Example, Leave the Vlan ID at

IPS4520K9 specifications

Cisco Systems has long been a leading player in network security, and its IPS (Intrusion Prevention System) series is a testament to its commitment to safeguarding digital environments. Among its notable offerings are the IPS4510K9 and IPS4520K9 models, both designed to provide advanced threat protection for mid-sized to large enterprise networks.

The Cisco IPS4510K9 and IPS4520K9 are distinguished by their cutting-edge features that help organizations defend against a myriad of cyber threats. These systems utilize a multi-layered approach to security, integrating intrusion prevention, advanced malware protection, and comprehensive visibility across the network.

One of the primary characteristics of the IPS4510K9 is its high performance. It boasts a throughput of up to 1 Gbps, making it suitable for environments that demand rapid data processing and real-time responses to threats. The IPS4520K9, on the other hand, enhances that capability with improved throughput of up to 2 Gbps, accommodating larger enterprises with heavier network traffic. These models are equipped with powerful processors that support complex signature matching and can intelligently distinguish between legitimate traffic and potential threats.

In addition to performance, both models are designed with scalability in mind. They can be easily integrated into existing Cisco infrastructures. This facilitates a seamless enhancement of security without causing significant interruptions to ongoing operations. Moreover, they offer flexible deployment options, allowing organizations to operate them inline or out of band depending on their specific needs.

The Cisco IPS4510K9 and IPS4520K9 leverage advanced detection technologies, utilizing a variety of signature types and heuristic analysis to detect known and unknown threats effectively. They are equipped with real-time alerting and reporting capabilities, giving security teams immediate visibility into potential breaches and enabling them to respond swiftly.

Furthermore, both models support a range of management options through the Cisco Security Manager, allowing for centralized administration, streamlined policy management, and enhanced monitoring capabilities. Automated updates ensure the systems remain current with the latest threat intelligence, vital for staying ahead of evolving cyber threats.

In summary, the Cisco Systems IPS4510K9 and IPS4520K9 represent powerful solutions for organizations seeking robust intrusion prevention capabilities. With their high performance, scalability, and advanced detection technologies, these systems are essential tools in the ever-changing landscape of cybersecurity, providing enterprises with the peace of mind needed to operate securely in today's digital world.