Manuals / Cisco Systems / Computer Equipment / Switch

Cisco Systems IPS4520K9 manual Ips-ssp#hw-module module 1 recover configure

Models: IPS4520K9

1 460
Download 460 pages 188 b
Page 384
Image 384

Appendix E Troubleshooting

Troubleshooting the ASA 5585-X IPS SSP

Firmware version:

2.0(7)0

Software version:

7.1(1)E4

MAC Address Range:

5475.d029.7f9c to 5475.d029.7fa7

App. name:

IPS

App. Status:

Up

App. Status Desc:

Normal Operation

App. version:

7.1(1)E4

Data plane Status:

Up

Status:

Up

Mgmt IP addr:

192.0.2.3

Mgmt Network mask:

255.255.255.0

Mgmt Gateway:

192.0.2.254

Mgmt Access List:

0.0.0.0/0

Mgmt web ports:

443

Mgmt TLS enabled:

true

asa#

 

If you have problems with reimaging the ASA 5585-X IPS SSP, use the debug module-bootcommand to see the output as it boots. Make sure you have the correct IP address for the TFTP server and you have the correct file on the TFTP server. Then use the hw-module module 1 recover command again to reimage the module.

ips-ssp#hw-module module 1 recover configure

Image URL [tftp://0.0.0.0/]: tftp://10.10.10.10//IPS-SSP_20-K9-sys-1.1-a-7.1-1-E4.img

Port IP Address [0.0.0.0]: 10.10.10.11 VLAN ID [0]:

Gateway IP Address [0.0.0.0]: 10.10.10.254

asa(config)# debug module-boot

debug module-boot enabled at level 1 asa(config)# hw-module module 1 recover boot

The module in slot 1 will be recovered. This may erase all configuration and all data on that device and attempt to download a new image for it.

Recover module in slot 1? [confirm]

Recover issued for module in slot 1

asa(config)# Slot-1 140> Cisco Systems ROMMON Version (1.0(10)0) #0: Fri Mar 25 23:02:10 PST 2010

Slot-1 141> Platform ASA5585-SSP-IPS20

Slot-1 142> GigabitEthernet0/0

Slot-1 143> Link is UP

Slot-1 144> MAC Address: 000b.fcf8.0176

Slot-1 145> ROMMON Variable Settings:

Slot-1 146>

ADDRESS=192.0.2.3

Slot-1 147>

SERVER=192.0.2.15

Slot-1 148>

GATEWAY=192.0.2.254

Slot-1 149>

PORT=GigabitEthernet0/0

Slot-1 150>

VLAN=untagged

Slot-1 151>

IMAGE=IPS-SSP-K9-sys-1.1-a-7.1-0.1.img

Slot-1

152>

CONFIG=

Slot-1

153>

LINKTIMEOUT=20

Slot-1

154>

PKTTIMEOUT=4

Slot-1

155>

RETRY=20

Slot-1 156> tftp IPS-SSP_10-K9-sys-1.1-a-7.1-0.1.img@192.0.2.15 via 192.0.2.254

Slot-1 157> TFTP failure: Packet verify failed after 20 retries

Slot-1 158> Rebooting due to Autoboot error ...

Slot-1 159> Rebooting....

Slot-1 160> Cisco Systems ROMMON Version (1.0(10)0) #0: Fri Mar 25 23:02:10 PST 2010 Slot-1 161> Platform ASA5585-SSP-IPS20

Slot-1 162> GigabitEthernet0/0 Slot-1 163> Link is UP

 

 

 

Slot-1

164> MAC Address: 000b.fcf8.0176

 

 

 

Slot-1

165>

ROMMON Variable Settings:

 

 

 

Slot-1

166>

ADDRESS=192.0.2.3

 

 

 

Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1

 

 

 

 

E-78

 

 

 

OL-24002-01

 

 

 

 

 

 

Page 383 Page 385
Page 384
Image 384
Cisco Systems IPS4520K9 manual Ips-ssp#hw-module module 1 recover configure, Asaconfig# debug module-boot
Page 383 Page 385

IPS4520K9 specifications

Cisco Systems has long been a leading player in network security, and its IPS (Intrusion Prevention System) series is a testament to its commitment to safeguarding digital environments. Among its notable offerings are the IPS4510K9 and IPS4520K9 models, both designed to provide advanced threat protection for mid-sized to large enterprise networks.

The Cisco IPS4510K9 and IPS4520K9 are distinguished by their cutting-edge features that help organizations defend against a myriad of cyber threats. These systems utilize a multi-layered approach to security, integrating intrusion prevention, advanced malware protection, and comprehensive visibility across the network.

One of the primary characteristics of the IPS4510K9 is its high performance. It boasts a throughput of up to 1 Gbps, making it suitable for environments that demand rapid data processing and real-time responses to threats. The IPS4520K9, on the other hand, enhances that capability with improved throughput of up to 2 Gbps, accommodating larger enterprises with heavier network traffic. These models are equipped with powerful processors that support complex signature matching and can intelligently distinguish between legitimate traffic and potential threats.

In addition to performance, both models are designed with scalability in mind. They can be easily integrated into existing Cisco infrastructures. This facilitates a seamless enhancement of security without causing significant interruptions to ongoing operations. Moreover, they offer flexible deployment options, allowing organizations to operate them inline or out of band depending on their specific needs.

The Cisco IPS4510K9 and IPS4520K9 leverage advanced detection technologies, utilizing a variety of signature types and heuristic analysis to detect known and unknown threats effectively. They are equipped with real-time alerting and reporting capabilities, giving security teams immediate visibility into potential breaches and enabling them to respond swiftly.

Furthermore, both models support a range of management options through the Cisco Security Manager, allowing for centralized administration, streamlined policy management, and enhanced monitoring capabilities. Automated updates ensure the systems remain current with the latest threat intelligence, vital for staying ahead of evolving cyber threats.

In summary, the Cisco Systems IPS4510K9 and IPS4520K9 represent powerful solutions for organizations seeking robust intrusion prevention capabilities. With their high performance, scalability, and advanced detection technologies, these systems are essential tools in the ever-changing landscape of cybersecurity, providing enterprises with the peace of mind needed to operate securely in today's digital world.