Cisco Systems IPS4520K9 manual Installing the IPS 4345 and IPS Specifications

Chapter 6 Installing the IPS 4345 and IPS 4360

Specifications

Table 6-1	IPS 4345 and IPS 4360 Specifications (continued)
Operating power		372W	382W
Steady state/maximum
Total heat dissipation		730 BTU/hr	730 BTU/hr
Output hold-up time		20mS	12mS
Inrush current		40A	40A
Environment
Temperature		Operating: 23°F to 49°F	Operating: 23°F to 49°F
		(-5°C to 45°C)	(-5°C to 45°C)
		Nonoperating: -13°F to -94°F	Nonoperating: -13°F to -94°F
		(-25°C to -70°C)	(25°C to -70°C)
Airflow		Front to back	Front to back
Relative humidity		Operating: 0% to 90%	Operating: 0% to 90%
(noncondensing)		Nonoperating: 10% to 90%	Nonoperating: 10% to 90%
Altitude		Operating: 0 to 10,000 ft	Operating: 0 to 10,000 ft
		(0 to 3048 m)	(0 to 3048 m)
		Nonoperating: 0 to 15,000 ft	Nonoperating: 0 to 15,000 ft
		(0 to 4572 m)	(0 to 4572 m)
Acoustic noise		Operating: 64.2	Operating: 67.9
		Nonoperating: 70G,4.22m/s	Nonoperating: 70G,4.22m/s
Shock		50G,2ms	50G,2ms
Vibration		Operating: 0.41Grms,3Hz to 500Hz	Operating: 0.41Grms,3Hz to 500Hz
		with spectral break points of	with spectral break points of
		0.0005G2/Hz at 10Hz and 200Hz	0.0005G2/Hz at 10Hz and 200Hz
		and 5dB/octave roll-off at each end	and 5dB/octave roll-off at each end.
		Nonoperating: 1.12Grms,3Hz to	Nonoperating: 1.12Grms,3Hz to
		500Hz with spectral break points of	500Hz with spectral break points of
		0.0065G2/Hz at 10Hz and 100Hz	0.0065G2/Hz at 10Hz and 100Hz
		and 5dB/octave roll-off at each end	and 5dB/octave roll-off at each end

Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1

OL-24002-01 6-3