Indicator Color and State Description | Cisco Systems IPS4520K9

Chapter 6 Installing the IPS 4345 and IPS 4360

Removing and Installing the Power Supply

Table 6-4describes the power supply indicator. The function of the indicator is the same for both the AC and DC power supplies.

Table 6-4 AC and DC Power Supply Indicator

Indicator Color and State	Description

Solid green	Power output is on and within the normal operating range.

Blinking green, at the rate of one	Input power that is within the normal operating range is being
blink per second	supplied, but the Standby switch is in the Standby position (and
	not in the On position).

Solid amber	A power supply critical event has occurred, and the power
	supply has shut down. The critical event can be temperature,
	voltage, current, or fan operating outside the normal operating
	range.

Blinking amber, at the rate of one	A power supply warning event has occurred, but the power
blink per second	supply can continue to operate. The warning event can be
	temperature, voltage, current, or fan operating outside the
	normal operating range.

Off	The power supply is shut down.

Removing and Installing the AC Power Supply

Caution If you remove a power supply, replace it immediately to prevent disruption of service.

Caution If the appliance is subjected to environmental overheating, it shuts down and you must manually power cycle it to turn it on again.

Warning This unit has more than one power supply connection; all connections must be removed completely to completely remove power from the unit. Statement 102

Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 120 VAC, 20A U.S. (240 VAC, 10A international). Statement 1005

Note This procedure applies only to the appliances with a removable AC power supply (IPS 4360).

Note If only one power supply is installed, make sure that it is installed in slot 0 (left slot) and that slot 1 (right slot) is covered with a slot cover.

	Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1

OL-24002-01		6-17
OL-24002-01		6-17

IPS4520K9 specifications

Cisco Systems has long been a leading player in network security, and its IPS (Intrusion Prevention System) series is a testament to its commitment to safeguarding digital environments. Among its notable offerings are the IPS4510K9 and IPS4520K9 models, both designed to provide advanced threat protection for mid-sized to large enterprise networks.

The Cisco IPS4510K9 and IPS4520K9 are distinguished by their cutting-edge features that help organizations defend against a myriad of cyber threats. These systems utilize a multi-layered approach to security, integrating intrusion prevention, advanced malware protection, and comprehensive visibility across the network.

One of the primary characteristics of the IPS4510K9 is its high performance. It boasts a throughput of up to 1 Gbps, making it suitable for environments that demand rapid data processing and real-time responses to threats. The IPS4520K9, on the other hand, enhances that capability with improved throughput of up to 2 Gbps, accommodating larger enterprises with heavier network traffic. These models are equipped with powerful processors that support complex signature matching and can intelligently distinguish between legitimate traffic and potential threats.

In addition to performance, both models are designed with scalability in mind. They can be easily integrated into existing Cisco infrastructures. This facilitates a seamless enhancement of security without causing significant interruptions to ongoing operations. Moreover, they offer flexible deployment options, allowing organizations to operate them inline or out of band depending on their specific needs.

The Cisco IPS4510K9 and IPS4520K9 leverage advanced detection technologies, utilizing a variety of signature types and heuristic analysis to detect known and unknown threats effectively. They are equipped with real-time alerting and reporting capabilities, giving security teams immediate visibility into potential breaches and enabling them to respond swiftly.

Furthermore, both models support a range of management options through the Cisco Security Manager, allowing for centralized administration, streamlined policy management, and enhanced monitoring capabilities. Automated updates ensure the systems remain current with the latest threat intelligence, vital for staying ahead of evolving cyber threats.

In summary, the Cisco Systems IPS4510K9 and IPS4520K9 represent powerful solutions for organizations seeking robust intrusion prevention capabilities. With their high performance, scalability, and advanced detection technologies, these systems are essential tools in the ever-changing landscape of cybersecurity, providing enterprises with the peace of mind needed to operate securely in today's digital world.

Cisco Systems IPS4520K9 manual Removing and Installing the AC Power Supply

Models: IPS4520K9

Indicator Color and State

Description

Removing and Installing the AC Power Supply

IPS4520K9 specifications