Cisco Systems MC-607 manual Verifying DOCSIS-Compliant Bridging, MC-648

Configuring Subscriber-End Broadband Access Router Features

Reestablishing DOCSIS-Compliant Bridging

After entering this command, perform a warm reset of the Cisco uBR900 series cable access router by pressing and holding down the Reset button for less than 10 seconds. For information on the location and operation of the Reset button, refer to the “Product Overview” chapter of the Cisco uBR924 Hardware Installation Guide.

Verifying DOCSIS-Compliant Bridging

To verify that the cable access router is configured for DOCSIS-compliant bridging, enter the show startup-configcommand in privileged EXEC mode. The configuration should look like this:

uBR924# show startup-configBuilding configuration...

Current configuration:

!

version 12.1 service config no service pad

service timestamps debug uptime service timestamps log uptime no service password-encryption

!

hostname uBR924

!

clock timezone - 4 ip subnet-zero

no ip routing

!

voice-port 0

!

voice-port 1

!

!

interface Ethernet0 no ip address

no ip directed-broadcast no ip route-cache bridge-group 59

bridge-group 59 spanning-disabled interface cable-modem0

no ip address

no ip directed-broadcast no ip route-cache

no keepalive

cable-modem downstream saved channel 699000000 36 bridge-group 59

bridge-group 59 spanning-disabled

!

ip classless

no ip http server

!

line con 0 transport input none

line vty 0 4 login

!

end

Cisco IOS Multiservice Applications Configuration Guide

MC-648