4-24
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
OL-12586-02
Chapter4 Configuring CTMS Administration Software
System Settings
Figure4-2 Access Settings
To edit Access settings:
Step1 Click System Settings under the System Configuration folder in the Navigation Pane.
Step2 Click the Access Settings tab. Access Settings displays a table providing the Access Settings
configuration fields. All of the settings on the Access Screen are derived from settings you configured
in Cisco Unified Communications Manager (Unified CM).
Edit settings (as needed) as described in Tab le 4-2
•To register new or modified settings, click Apply.
•To restore the original settings, click Reset.
Configuring and Editing QoS Settings
Figure 4-3 shows the QoS Settings screen.
Table4-2 Access Settings
Field or Button Setting
Route Pattern Start Defines the first number in your defined route pattern as configured
in Unified CM.
Route Pattern End Defines the last number in your defined route pattern as con figured
in Unified CM.
Access Number Displays the first number in the route pattern as defined in
Unified CM. CTMS Administration software (CTMSA)
automatically selects that number as the access number. That number
is used for scheduled meetings and cannot be used for static
meetings.
Access Name Descriptive name for the access number. Maximum number of
characters is 20.