Cisco Systems MCS 7800 Series manual Setting

Chapter 8 Interoperability with Legacy Video Conferencing Devices

Configuring Cisco TelePresence Interoperability

Table 8-4	Static Meetings Table Field Descriptions
Field		Description
Switching Policy		Displays the defined switching policy (site or segment) for this
		static meeting.
Max Rooms		Displays the maximum number of sites that can participate in this
		static meeting.
Quality		Sets the maximum bit rate and video resolution to be used for the
		meeting.
Interop		A green check indicates that this particular Cisco TelePresence
		multipoint meeting supports Cisco Unified Video Conferencing
		(CUVC) systems (interoperability mode). A red “X” indicates that
		this meeting is not configured to cascade with CUVC systems.
CUVC Number		(Optional) Number dialed to CUVC for interoperability meetings.

•To delete one of the defined static meetings, click the radio button to the left of the table entry, and then click Delete.

•To edit one of the defined static meetings, click the radio button to the left of the table entry, and then click Edit.

•To define a new static meeting, click New.

Step 3 When you click Edit or New, CTMS Administration software takes you to the Static Meeting Settings table. Enter settings as described in Table 8-5:

		Table 8-5	Static Meeting Settings
		Field or Button		Setting
		Access Number		Defines the telephone number that participants call to attend this
					static meeting.
		Meeting Description		Text describing or identifying this static meeting. The maximum
					number of characters for this field is 62 characters.
		Switching Policy			Defines how CTMS calls are displayed during a meeting. CTMS
					displays active speakers on screen. There are two active speaker
					display options:
					• Segment: (Speaker) With segment switching, each individual
						table segment (defined as a display and a camera) is displayed
						on the screen as that segment becomes the active speaker.
					• Site: (Room) When you select “site,” all table segments for a
						particular room are displayed on screen when any segment in
						that room is the active speaker.
					Click the appropriate radio button to select.
					Note		If you are running CTS 1.3 or later, you can control how
							Cisco TelePresence calls are displayed from the Cisco
							TelePresence phone interface. Press the Speaker softkey to
							display the active segment; press the Room softkey to
							display all segements from a particular site.
	Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
8-86							OL-12586-02