Cisco Systems MCS 7800 Series manual Room Testing Screen

Chapter 7 Monitoring CTMS System Processes

Room Testing

Figure 7-5 Room Testing Screen

Step 2 The initial Room Testing screen displays a table providing the following information, listing all currently active meetings by ID numbers:

Table 7-3	Room Testing Table Field Descriptions
Field		Description
Meeting ID		ID number uniquely identifying an active meeting.
Description		Text describing the active meeting.
Type		Displays the defined meeting type. Meeting types are static and
		ad hoc.
Rooms		Lists the CTS end points (meeting rooms) attending this meeting.
Duration		Length of time this meeting has been active, listed in hours, minutes
		and seconds.
Segments		Total number of segments for all rooms attending this meeting.

Step 3 To use the filter at the top of the table to find a particular meeting, enter either the Meeting ID number or the Room number in the appropriate field and then press “Filter.”

Step 4 To display a defined number of table rows, click the down arrow next to “Rows per page.” Click to highlight and select predetermined amounts. If there are multiple pages, click the First, Previous, Next, or Last button to navigate to the desired page.

Step 5 Click “Refresh” to refresh the active meetings displayed.

Step 6 Click the radio button to the left of a table entry to select a particular meeting. Click “Details” to display the Room Testing screen for the rooms in that meeting.

a.Click “Loopback” to display the transmitted camera image (image is looped-back so that attendees see themselves) in each of the rooms for the selected meeting.

	Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
OL-12586-02		7-73