Cisco Systems MCS 7800 Series manual Enter settings as described in Table

Chapter 4 Configuring CTMS Administration Software

Configuring and Editing Access Management

•To edit one of the defined administrators, click the radio button to the left of the table entry, and then click Edit.

•To define a new administrator, click New,

Step 3 When you click New from the Access Management screen, CTMS Administration software takes you to the New User Settings table as shown in Figure 4-12.

Figure 4-12 New User Settings

Step 4	Enter settings as described in Table 4-10
	Table 4-10	New User Settings
	Field or Button		Setting
	Username		Username identifying a defined role as selected from the Role field.
			Note Usernames must be at least 5 characters, but not more than
			64 characters in length, and can contain upper and lower case
			alphanumeric characters and the underscore and dash
			characters. The following usernames are not allowed:
			apache, daemon, nobody, operator, and shutdown.
	Password		Password for the username indicated in the Username field.
			Note Passwords must be at least 5 characters, but not more than 64
			characters in length, and can contain upper and lower case
			alphanumeric characters and the underscore and dash
			characters. The following usernames are not allowed:
			apache, daemon, nobody, operator, and shutdown.

	Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
4-38	OL-12586-02