Cisco Systems MCS 7800 Series manual Configuring a Route Pattern

Chapter 2 Configuring Cisco Unified Communications Manager for CTMS

Configuring a Route Pattern

Step 5 Click the Save button at the bottom of the page.

Configuring a Route Pattern

A route pattern allows a Unified CM-managed device to access another device by dialing its number. Such devices may include gateways, Cisco TelePresence Multipoint Switch (CTMS) systems, or Cisco Unified Video Conferencing (CUVC) MCUs. Each device requires its own unique route pattern.

To configure a route pattern:

Step 1	Click Call Routing. Under Route/Hunt, click Route Pattern.
Step 2	Click the Add New button at the bottom or click the + sign at the top of the Route Pattern Configuration
	page.
Step 3	Enter the settings as indicated in Table 2-3to configure the SIP trunk. Leave default settings for fields
	not included in Table 2-3.
	.
	Table 2-3	Route Pattern Configuration Settings
	Field		Required	Setting
	Pattern Definition
	Route Pattern		Yes	Enter the route pattern, including numbers and
					wildcards (do not use spaces); for example, for
					NANP, enter 9.@ for typical local access, or
					8XXX for a typical private network numbering
					plan. The uppercase characters A, B, C, and D are
					valid characters.
					Note	See the “Wildcards and Special
						Characters in Route Patterns and Hunt
						Pilots” section in the Cisco CallManager
						System Guide for more information about
						wildcards.
	Description		—	Enter a text string describing this route pattern.
	Gateway/Route List		Yes	Select the SIP trunk that you created for CTMS.
	Call Classification		Yes		Select OnNet.
Step 4	Click the Save button at the bottom of the page.

	Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
2-16	OL-12586-02