Section 3 | Configuration |
|
|
Configuring the Router Host Name
This feature allows you to change the Host Name of your router. This feature only applies to your private home network.
To access the screen, click Networking > DNS Proxy.
FieldDescription
LAN Private Host Displays the current Host name for the router. Enter in a new name if
Name | desired. |
| The default is wr850g (all lower case). |
Host Table | Displays the current active Host Name and its associated IP address. |
Apply | Click to save your changes. |
Cancel | Click to cancel your changes. |
Configuring Network Router Settings
From the Networking – Routing screen, you can define up to 20 static routes that specify the Destination IP, Subnet Mask, Gateway, Interface, and Metric (how many “hops” the router can make). You can also configure the Network Routing Table here.
RIP (Routing Information Protocol) versions 1 and 2 are routing protocols that are part of the TCP/IP protocol standard. RIP dynamically determines a route based on the smallest hop count between source and destination.
WR850 |
