Electrical Connection to Router

Section 2

Installation

 

 

Electrical Connection to Router

Your router does not have an On/Off power switch and therefore will only be powered on by plugging in the power adapter:

Reset

Power

LAN

To power

supply

1Connect the power adapter to the router’s Power port, found on the back of the router.

2Plug the power adapter into a grounded and surge-protected power outlet. The Power LED on the front panel lights green when connected properly.

Easy Software Setup

Run the Installation Wizard program from the supplied CD-ROM to quickly set up your network. Once your network is up and running, for advanced configuration, see Section 3: Configuration.

Manual Software Setup

If you’d prefer to manually set up your network, use this section to configure it. This section details the physical connection of the router to your network as well as the configuration needed by your PC.

To set up your wireless network:

Physically connect and power on the router Configure your PCs

Enter Wireless Security settings

2-6

WR850

Page 23
Image 23
Motorola WR850 manual Electrical Connection to Router, Easy Software Setup, Manual Software Setup, Section, Installation