Section 3 | Configuration |
|
|
Field Key Index
Key Content
Key 1
Key 2
Key 3
Key 4
Description
Use the
4)are available. The number of keys is determined by what is selected in the ESS Authentication and Encryption Status fields.
The Key selected here must match the key selected in the client. For example, if you select Key 1 here you have to select Key 1 for the client.
The default is 1.
Enter key content in these fields. The Key Content format is selected in the Key Input Method field.
For the key content, the phrase is
If you have selected Hexadecimal or ASCII formatting (in the Key Input Method field), you can then enter your own Hexadecimal or ASCII keys. To enter keys manually, you must also have WEP64 or WEP128 selected in the Encryption Status field.
For WEP64 keys, 5 case sensitive ASCII characters are allowed or 10 hexadecimal characters (using only characters
For WEP128 keys, 13 case sensitive ASCII characters are allowed or 26 hexadecimal characters (using only characters
If entering a key manually, don’t leave a key field blank or enter all 0’s. These are not secure keys.
Group Key Renewal Interval
RADIUS Server
IP
RADIUS Server
Port Number
This is the number of seconds that pass until your router sends out a new group key. Only available if WPA or 802.1X are selected.
The default is 300 seconds.
Enter the RADIUS Server IP and Port number. RADIUS is an authentication and accounting system to verify users.
To display these fields, either of the following conditions need to exist:
Open System or WPA is selected, along with either WEP64 or WEP128, and 802.1X is enabled
WPA is selected and TKIP or AES is selected. The default RADIUS Port Number is 1812.
WR850 |
