Field

Configuration

Section 3

 

 

To access the screen, click Networking > Routing.

Field

RIP V1

RIP V2

Routing Table Entry List

Description

Enables or disables RIPv1.

The default is disabled.

Enables or disables RIPv2.

The default is disabled.

To add a Routing Entry:

1Select a Destination IP number, (the client’s Routing IP address).

2Enter Subnet Mask and Gateway IP address.

3Select the Interface (LAN & Wireless or Internet (WAN)) to which the entry will apply.

4Enter the Metric (or how many hops the routing can take).

5Click Add to enter the Routing Entry into the Routing Table.

6Click Apply to save the entry.

To edit or remove an entry, click the desired entry and perform the requested action.

WR850

3-29

Page 67
Image 67
Motorola WR850 manual Configuration, Section, Field RIP RIP Routing Table Entry List, Description