![](/images/new-backgrounds/1256959/25695927x1.webp)
Getting Started | 1 |
| |
Installing the Cisco SPA302D |
|
|
|
|
|
Charging the Handset
STEP 1 Remove the back cover of the handset.
STEP 2 Insert the two AAA rechargeable batteries (included) into the handset. Correct battery placement is shown on the label inside the battery compartment. If the batteries are charged, the handset turns on when the batteries are inserted. If the batteries are not charged, the handset turns on when it is placed into the charging cradle.
!
CAUTION Use only size AAA
STEP 3 Remove the protective film from the handset and charging cradle.
STEP 4 Insert the power clip into the power adapter.
STEP 5 Insert the power adapter into the power source.
STEP 6 Connect the power adapter to the charging cradle in the port shown below.
!
CAUTION Only use the power adapter designed for use with Cisco SPA300 Series devices.
Cisco SPA302D Mobility Enhanced Cordless Handset User Guide | 10 |