Cisco Systems UBR10012 debug cable receive (for Upstream Messages), debug cable reg (for Modem Registration Requests), debug cable reset (for Reset Messages), debug cable specmgmt (for Spectrum Management)

6-19
Cisco uBR10012 Universal Broadband Router Software Configuration Guide
OL-1520-05
Chapter6 Troubleshooting the System Using Cable Interface debug Commands
debug cable receive (for Upstream Messages)
To activate the debugging of upstream messages from cableinterfaces, use the debug cable receive
command in privileged EXEC mode. To deactivate debugging of upstream messages, use the no form of
this command.
debug cable receive
no debug cable receive
When this command is activated, any messages generated by cable interfaces and sent to the
CiscouBR10012router are displayed on the router console.
debug cable reg (for Modem Registration Requests)
To activate the debugging of registration requests from cableinterfaces on the HFC network, use the
debug cable reg command in privileged EXEC mode. To deactivate debugging of cable registration, use
the no form of this command.
debug cable reg
no debug cable reg
When this command is activated, messages generated by cableinterfaces as they make requests to
connect to the network are displayed on the CiscouBR10012router console.
debug cable reset (for Reset Messages)
To activate the debugging of reset messages from cableinterfaces on the HFC network, use the
debugcable reset command in privileged EXEC mode. To deactivate debugging of cable reset
messages, use the no form of this command.
debug cable reset
no debug cable reset
When this command is activated, reset messages generated by cableinterfaces are displayed on the
CiscouBR10012router console.
debug cable specmgmt (for Spectrum Management)
To activate the debugging of spectrum management (frequency agility) on the HFC network, use the
debug cable specmgmt command in privileged EXEC mode. To deactivate debugging of cable spectrum
management, use the no form of this command.
debug cable specmgmt
no debug cable specmgmt
When this command is activated, messages generated because of spectrum group activity are displayed
on the CiscouBR10012router console. Spectrum group activity can be additions or changes to spectrum
groups, or frequency and power level changes controlled by spectrum groups.