1-78
Cisco uBR10012 Universal Broadband Router Software Configuration Guide
OL-1520-08
Chapter1 Overview of CiscouBR10012 Universal Broadband Router Software
Supported Software Features for the CiscouBR10012 Router

Subscriber Traffic Management (STM) Version 1.1

Cisco IOS Release 12.3(9a)BC introduces support for Subscriber Traffic Management (STM) through
Version 1.1 on the Cisco uBR10012 universal broadband router. STM 1.1 supports DOCSIS
1.1-compliant cable modems.
The STM feature enables service providers to identify and control subscribers who exceed the maximum
bandwidth allowed under their registered quality of service (QoS) profiles. STM 1.1 works with
Network-Based Application Recognition (NBAR) and Access control lists (ACLs) to ensure full
network performance to other network subscribers that abide by their service agreements. STM 1.1 also
works in conjunction with the Cisco Broadband Troubleshooter 3.2 to support additional network
management and troubleshooting functions in the Cisco CMTS.
STM 1.1 extends earlier STM functions to monitor a subscriber's traffic on DOCSIS 1.1 primary service
flows and supports these additional features:
Cisco Broadband Troubleshooter (CBT) 3.2 supports STM 1.1.
DOCSIS 1.0-compliant and DOCSIS 1.1-compliant cable modem are supported.
Monitoring and application of traffic management policies are applied on a service-flow basis.
Monitoring window duration increased from seven to 30 days.
For additional information about STM 1.1 and Cisco CBT 3.2, refer to the following document on
Cisco.com:
Subscriber Traffic Management for the Cisco CMTS
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122limit/122bc/122b
c_15/ubsubmon.htm
Release Notes for Cisco Broadband Troubleshooter Release 3.2
http://www.cisco.com/univercd/cc/td/doc/product/cable/trblshtr/cbt32/cbt32rn.htm

Usage Based Billing (SAMIS)

Cisco IOS Release 12.3(9a)BC introduces the Usage-Based Billing feature on the Cisco uBR10012
router, supporting DOCSIS 1.0- and DOCSIS 1.1-compliant cable modems. This feature provides
subscriber account and billing information in the Subscriber Account Management Interface
Specification (SAMIS) format. SAMIS is specified by the Data-over-Cable Service Interface
Specifications (DOCSIS) Operations Support System Interface (OSSI) specification.
The CISCO-CABLE-METERING-MIB is also introduced with Cisco IOS Release 12.3(9a)BC in
support of SAMIS.
For additional information about configuring and monitoring Usage-Based Billing (SAMIS) on the
Cisco uBR10012 CMTS, refer to the following document on Cisco.com:
Usage Based Billing for the Cisco CMTS
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122limit/122bc/
122bc_15/ubrsamis.htm
PacketCable and Voice Support Features
The Cisco uBR10012 router supports the following PacketCable and PacketCable MultiMedia features:
PacketCable 1.0 With CALEA
PacketCable Emergency 911 Cable Interface Line Card Prioritization