Installing the Chassis
This section describes how to install the chassis. This two part process consists of installing the rails into the
rack and then installing the chassis into the rack and on to the rails.
Never attempt to lift the chassis by using an installed module’s handle as a grip point. only use the handles
on the sides of the chassis.
Caution
If the rack has wheels, ensure that the brakes are engaged, the stabilizing pads are extended, or that the
rack is otherwise stabilized.
Caution
Table 1: Contents of the Cisco UCS 5108 Server Chassis Rack-Mount Kit (N20-CRMK2=)
Part DescriptionQuantity
Left tool-less rack mount rail1
Right tool-less rack mount rail1
10-32 X 0.75 Phillips round washer head screws6
10-32 X 0.125 cage nuts6
Table 2: Contents of the Cisco UCS 5108 Server Round Hole Adapter Kit (N20-CRMK2-RHA=)
Part DescriptionQuantity
Round hole adapters (threaded)4
Round hole adapters (un-threaded)4
Adapter securing screws4
Phillips head screws for securing the rails to the rack16
The plug-socket combination must be accessible at all times, because it serves as the main disconnecting
device. Statement 1019
Warning
Cisco UCS 5108 Server Chassis Installation Guide
OL-20035-05 7
Installation
Installing the Chassis