Installation
Optical SFP+ Transceivers
Model | Description |
SFP-H10GB-CU3M | 10-Gb Ethernet—copper SFP+ (3 m, 9.84 ft.) |
SFP-H10GB-CU5M | 10-Gb Ethernet—copper SFP+ (5 m, 16.4 ft.) |
SFP-H10GB-ACU7M | 10-Gb Ethernet—copper SFP+ (7 m, 22.9 ft.) |
SFP-H10GB-ACU10M | 10-Gb Ethernet—copper SFP+ (10 m, 32.8 ft.) |
The figure below shows the SFP-H10GB-CU5M transceiver. The rubber loop is used for removing the SFP+ from its port on the I/O module.
Figure 17: SFP+ 10 Gb Twinax Copper Transceiver
187492
Optical SFP+ Transceivers
If distances greater than 10 meters (33 feet) must be spanned, the FEX also supports the substitution of the copper SFP+ by optical SFP+ transceivers. The SFP+ 10-Gb Ethernet optical transceiver is a bidirectional device with a transmitter and receiver in the same physical package. It has a duplex LC connector on the optical interface.
Model | Description |
SFP-10G-SR | Short–range optical SFP+ (up to 300 m/ 984 feet) |
SFP-10G-LR 1 | Long–range optical SFP+ (up to 10 km/6.2 miles) |
1While the SFP-10G-LR is supported by both the fabric interconnect and I/O module, the maximum distance will introduce latency issues that will affect overall performance.
Documentation for SFP+ 10-Gb Ethernet optical transceivers is at
http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/installation/note/78_15160.html
Cisco UCS 5108 Server Chassis Installation Guide
