18
Installing the Cisco WAE Inline Network Adapter
OL-12480-03
Installing Adapters in the WAE-7326 Appliance
Removing the Cover
Warning
Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord.
Statement 1
To remove the device top cover, follow these steps:
Step1 Review the information in the “Safety Guidelines” section on page5.
Step2 Power off the device and all attached devices and disconnect all external cables and power cords.
Step3 Press down on the left and right side latches and pull the device out of the rack enclosure until both slide
rails lock.
Note You can reach the cables on the back of the device when the device is in the locked position.
Step4 Lift the cover-release latch (labeled 1 in Figure11). Lift the cover off the device and set the cover aside.
Figure11 Removing the Cover
Caution For proper cooling and airflow, replace the cover before turning on the device. Operating the device for
extended periods (over 30minutes) with the cover removed might damage device components.
159947
1