8
Installing the Cisco WAE Inline Network Adapter
OL-12480-03
Installing Adapters in the FE-511, WAE-511, and WAE-611 Appliances
Removing the Cover
Warning
Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord.
Statement 1
To remove the cover, follow these steps:
Step1 Review the information in the “Safety Guidelines” section on page5.
Step2 Power down the appliance and all attached devices. Disconnect the power cord and all external cables.
Step3 Loosen the two captive screws (labeled 1 in Figure3) on the rear of the cover.
Figure3 Removing the Cover
Step4 Slide the cover back, and then lift it up and off the appliance.
Caution For proper cooling and airflow, replace the cover before turning on the appliance. Operating the
appliance for extended periods (over 30minutes) with the cover removed might damage appliance
components.
115802
1