Wired Connection to a Computer

Wireless-G ADSL Gateway with SpeedBooster

1.Make sure that all of your network’s hardware is powered off, including the Gateway and all computers.

2.Connect a phone cable from the Line port on the Gateway’s side panel to the wall jack of the ADSL line. A small device called a microfilter (not included) may be necessary between each phone and wall jack to prevent interference. Contact your ISP if you have any questions.

NOTE: A small device called a microfilter (not included) may be necessary between each phone and wall jack to prevent interference. Contact your ISP if you have any questions.

IMPORTANT: For countries that have phone jacks with RJ-11 connectors, make sure to only place the microfilters between the phone and the wall jack and not between the Gateway and the wall jack or your ADSL will not connect.

For countries that do not have phone jacks with RJ-11 connectors (e.g. France, Sweden, Switzerland, United Kingdom, etc.), except for ISDN users, the microfilter has to be used between the Gateway and the wall jack, because the microfilter will have the RJ-11 connector.

Annex B users (E1 and DE versions of the Gateway) must use the included network cable to connect the Gateway to the wall jack or NTBA device. If you require splitters or special jacks, please contact your service provider.

3.Connect one end of an Ethernet network cable to one of the Ethernet ports (labeled 1-4) on the back of the Gateway, and the other end to an Ethernet port on a computer.

Repeat this step to connect more computers, a switch, or other network devices to the Gateway.

4.Connect the power adapter to the Gateway’s Power port, and then plug the power adapter into a power outlet.

NOTE: You should always plug the Gateway’s power adapter into a power strip with surge protection.

The Power LED on the front panel will light up green as soon as the power adapter is connected properly. The Power LED will flash for a few seconds, and then it will be solidly lit when the self-test is complete. If the LED flashes for one minute or longer, see “Appendix A: Troubleshooting.”

5. Power on one of your computers that is connected to the Gateway.

Go to “Chapter 5: Setting up the Wireless-G ADSL Gateway with SpeedBooster.”

Chapter 4: Connecting the Wireless-G ADSL Gateway with SpeedBooster

Figure 4-1: Connect the ADSL Line

Figure 4-2: Connect a PC

Figure 4-3: Connect the Power

Wired Connection to a Computer

WAG54GS (EU) specifications

The Cisco Systems WAG54GS (EU) is a versatile and robust integrated broadband gateway designed to meet the growing demands of home and small office environments. This device combines both routing and DSL modem functionalities, allowing users to connect multiple devices to the internet seamlessly. Its compact design and user-friendly interface make it an ideal solution for users seeking a reliable internet connection with minimal setup.

One of the standout features of the WAG54GS is its dual-band wireless capabilities, allowing it to operate on both the 2.4 GHz and 5 GHz frequency bands. This flexibility provides users with the option to connect a variety of wireless devices while minimizing interference from other electronic devices. The router complies with the 802.11g wireless standard, offering speeds of up to 54 Mbps, making it suitable for tasks such as web browsing, file sharing, and streaming media.

The WAG54GS also features a built-in 4-port Ethernet switch, enabling users to connect wired devices directly for a more stable and consistent internet connection. This is particularly useful for bandwidth-intensive applications where a wired connection is preferred. In addition, the device supports Quality of Service (QoS) settings, allowing users to prioritize traffic for certain applications, ensuring smooth performance for voice and video calls.

Security is a significant consideration in the design of the WAG54GS, with several features to protect the network from unauthorized access. It incorporates WPA and WPA2 encryption protocols, ensuring data is transmitted securely over the wireless network. Additionally, the built-in firewall protects against external threats, while the ability to create a demilitarized zone (DMZ) allows users to isolate certain devices for additional security.

The setup process for the WAG54GS is straightforward, thanks to its web-based interface, enabling users to configure settings easily. The device also includes a wizard that guides users through the initial configuration process, making it accessible even for those who may not be tech-savvy.

In conclusion, the Cisco Systems WAG54GS (EU) is an ideal choice for users seeking a reliable and easy-to-use broadband gateway. Its combination of wireless and wired connectivity, robust security features, and user-friendly setup make it a solid investment for enhanced internet access in home and small office setups.

Cisco Systems WAG54GS (EU) manual Wired Connection to a Computer, Connect the Adsl Line

Models: WAG54GS (EU)

Wireless-G ADSL Gateway with SpeedBooster