Need to upgrade the firmware | Cisco Systems WAG54GS (EU) instruction

Wireless-G ADSL Gateway with SpeedBooster

•For Netscape 6 or higher:

1.Start Netscape Navigator, and click Edit, Preferences, Advanced, and Proxies.

2.Make sure you have Direct connection to the Internet selected on this screen.

3.Close all the windows to finish.

11.To start over, I need to set the Gateway to factory default.

Hold the Reset button for 10 seconds and then release it. This will return the Internet settings, password, forwarding, and other settings on the Gateway to the factory default settings. In other words, the Gateway will revert to its original factory configuration.

12.I need to upgrade the firmware.

In order to upgrade the firmware with the latest features, you need to go to the Linksys international website and download the latest firmware at www.linksys.com/international.

•Follow these steps:

1.Go to the Linksys international website at http://www.linksys.com/international and select your region or country.

2.Click the Products tab and select the Gateway.

3.On the Gateway’s webpage, click Firmware, and then download the latest firmware for the Gateway.

4.To upgrade the firmware, follow the steps in the Administration section found in “Chapter 6: Configuring the Wireless-G ADSL Gateway with SpeedBooster.”

13.The firmware upgrade failed, and/or the Power LED is flashing.

The upgrade could have failed for a number of reasons. Follow these steps to upgrade the firmware and/or make the Power LED stop flashing:

•If the firmware upgrade failed, use the TFTP program (it was downloaded along with the firmware). Open the pdf that was downloaded along with the firmware and TFTP program, and follow the pdf’s instructions.

•Set a static IP address on the computer; refer to “Problem #1, I need to set a static IP address.” Use the following IP address settings for the computer you are using:

IP Address: 192.168.1.50

Subnet Mask: 255.255.255.0

Gateway: 192.168.1.1

•Perform the upgrade using the TFTP program or the Gateway’s web-based utility through its Administration tab.

14.My DSL service’s PPPoE is always disconnecting.

PPPoE is not actually a dedicated or always-on connection. The DSL ISP can disconnect the service after a period of inactivity, just like a normal phone dial-up connection to the Internet.

•There is a setup option to “keep alive” the connection. This may not always work, so you may need to re- establish connection periodically.

Appendix A: Troubleshooting

Common Problems and Solutions

WAG54GS (EU) specifications

The Cisco Systems WAG54GS (EU) is a versatile and robust integrated broadband gateway designed to meet the growing demands of home and small office environments. This device combines both routing and DSL modem functionalities, allowing users to connect multiple devices to the internet seamlessly. Its compact design and user-friendly interface make it an ideal solution for users seeking a reliable internet connection with minimal setup.

One of the standout features of the WAG54GS is its dual-band wireless capabilities, allowing it to operate on both the 2.4 GHz and 5 GHz frequency bands. This flexibility provides users with the option to connect a variety of wireless devices while minimizing interference from other electronic devices. The router complies with the 802.11g wireless standard, offering speeds of up to 54 Mbps, making it suitable for tasks such as web browsing, file sharing, and streaming media.

The WAG54GS also features a built-in 4-port Ethernet switch, enabling users to connect wired devices directly for a more stable and consistent internet connection. This is particularly useful for bandwidth-intensive applications where a wired connection is preferred. In addition, the device supports Quality of Service (QoS) settings, allowing users to prioritize traffic for certain applications, ensuring smooth performance for voice and video calls.

Security is a significant consideration in the design of the WAG54GS, with several features to protect the network from unauthorized access. It incorporates WPA and WPA2 encryption protocols, ensuring data is transmitted securely over the wireless network. Additionally, the built-in firewall protects against external threats, while the ability to create a demilitarized zone (DMZ) allows users to isolate certain devices for additional security.

The setup process for the WAG54GS is straightforward, thanks to its web-based interface, enabling users to configure settings easily. The device also includes a wizard that guides users through the initial configuration process, making it accessible even for those who may not be tech-savvy.

In conclusion, the Cisco Systems WAG54GS (EU) is an ideal choice for users seeking a reliable and easy-to-use broadband gateway. Its combination of wireless and wired connectivity, robust security features, and user-friendly setup make it a solid investment for enhanced internet access in home and small office setups.

Cisco Systems WAG54GS (EU) manual To start over, I need to set the Gateway to factory default

Models: WAG54GS (EU)