Advanced Wireless Settings Tab | Cisco Systems WAG54GS (EU) instruction

Wireless-G ADSL Gateway with SpeedBooster

The Advanced Wireless Settings Tab

You can access the advanced wireless features on this screen.

Advanced Wireless

Wireless-G Settings

•Authentication Type. The default is set to Auto, which allows Open System and Shared Key authentication. For Open System authentication, the sender and the recipient do not use a WEP key for authentication but can use WEP for data encryption. For Shared Key authentication, the sender and recipient use a WEP key for both authentication and data encryption. To only allow Shared Key authentication, select Shared Key. In most cases, you should keep the default setting, Auto, because some clients cannot be configured for Shared Key.

•Control Tx Rates. The default transmission rate is Auto. The rate should be set depending on the speed of your wireless network. Select from a range of transmission speeds, or keep the default setting, Auto, to have the Gateway automatically use the fastest possible data rate and enable the Auto-Fallback feature. Auto- Fallback will negotiate the best possible connection speed between the Gateway and a wireless client.

•Beacon Interval. The default value is 100. The Beacon Interval value indicates the frequency interval of the beacon. A beacon is a packet broadcast by the Gateway to synchronize the wireless network.

•DTIM Interval. The default value is 1. This value indicates the interval of the Delivery Traffic Indication Message (DTIM). A DTIM field is a countdown field informing clients of the next window for listening to broadcast and multicast messages. When the Gateway has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. Its clients hear the beacons and awaken to receive the broadcast and multicast messages.

•Fragmentation Threshold. This value should remain at its default setting of 2346. It specifies the maximum size for a packet before data is fragmented into multiple packets. If you experience a high packet error rate, you may slightly increase the Fragmentation Threshold. Setting the Fragmentation Threshold too low may result in poor network performance. Only minor modifications of this value are recommended.

•RTS Threshold. This value should remain at its default setting of 2346. If you encounter inconsistent data flow, only minor modifications are recommended. If a network packet is smaller than the preset RTS threshold size, the RTS/CTS mechanism will not be enabled. The Gateway sends Request to Send (RTS) frames to a particular receiving station and negotiates the sending of a data frame. After receiving an RTS, the wireless station responds with a Clear to Send (CTS) frame to acknowledge the right to begin transmission.

When finished making your changes on this tab, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes. Click Help for more information.

Chapter 6: Configuring the Wireless-G ADSL Gateway with SpeedBooster

Figure 6-23: Advanced Wireless Settings

The Wireless Tab

WAG54GS (EU) specifications

The Cisco Systems WAG54GS (EU) is a versatile and robust integrated broadband gateway designed to meet the growing demands of home and small office environments. This device combines both routing and DSL modem functionalities, allowing users to connect multiple devices to the internet seamlessly. Its compact design and user-friendly interface make it an ideal solution for users seeking a reliable internet connection with minimal setup.

One of the standout features of the WAG54GS is its dual-band wireless capabilities, allowing it to operate on both the 2.4 GHz and 5 GHz frequency bands. This flexibility provides users with the option to connect a variety of wireless devices while minimizing interference from other electronic devices. The router complies with the 802.11g wireless standard, offering speeds of up to 54 Mbps, making it suitable for tasks such as web browsing, file sharing, and streaming media.

The WAG54GS also features a built-in 4-port Ethernet switch, enabling users to connect wired devices directly for a more stable and consistent internet connection. This is particularly useful for bandwidth-intensive applications where a wired connection is preferred. In addition, the device supports Quality of Service (QoS) settings, allowing users to prioritize traffic for certain applications, ensuring smooth performance for voice and video calls.

Security is a significant consideration in the design of the WAG54GS, with several features to protect the network from unauthorized access. It incorporates WPA and WPA2 encryption protocols, ensuring data is transmitted securely over the wireless network. Additionally, the built-in firewall protects against external threats, while the ability to create a demilitarized zone (DMZ) allows users to isolate certain devices for additional security.

The setup process for the WAG54GS is straightforward, thanks to its web-based interface, enabling users to configure settings easily. The device also includes a wizard that guides users through the initial configuration process, making it accessible even for those who may not be tech-savvy.

In conclusion, the Cisco Systems WAG54GS (EU) is an ideal choice for users seeking a reliable and easy-to-use broadband gateway. Its combination of wireless and wired connectivity, robust security features, and user-friendly setup make it a solid investment for enhanced internet access in home and small office setups.

Cisco Systems WAG54GS (EU) manual Advanced Wireless Settings Tab, Wireless-G Settings

Models: WAG54GS (EU)