Wireless-G ADSL Gateway with SpeedBooster

For Windows 98 and Me:

•Click Start and Run. In the Open field, type in command. Press the Enter key or click the OK button. For Windows NT, 2000, and XP:

•Click Start and Run. In the Open field, type cmd. Press the Enter key or click the OK button. In the command prompt, type ping 192.168.1.1 and press the Enter key.

•If you get a reply, the computer is communicating with the Gateway.

•If you do NOT get a reply, please check the cable, and make sure Obtain an IP address automatically is selected in the TCP/IP settings for your Ethernet adapter.

C.In the command prompt, type ping followed by your Internet or WAN IP address and press the Enter key. The Internet or WAN IP Address can be found on the Status screen of the Gateway’s web-based utility. For example, if your Internet or WAN IP address is 1.2.3.4, you would enter ping 1.2.3.4 and press the Enter

key.

•If you get a reply, the computer is connected to the Gateway.

•If you do NOT get a reply, try the ping command from a different computer to verify that your original computer is not the cause of the problem.

D. In the command prompt, type ping www.yahoo.com and press the Enter key.

•If you get a reply, the computer is connected to the Internet. If you cannot open a webpage, try the ping command from a different computer to verify that your original computer is not the cause of the problem.

•If you do NOT get a reply, there may be a problem with the connection. Try the ping command from a different computer to verify that your original computer is not the cause of the problem.

3.I am not getting an IP address on the Internet with my Internet connection.

•Refer to “Problem #2, I want to test my Internet connection” to verify that you have connectivity.

1.Make sure you are using the right Internet connection settings. Contact your ISP to see if your Internet connection type is RFC 1483 Bridged, RFC 1483 Routed, RFC 2516 PPPoE, RFC 2364 PPPoA, Bridged Mode Only, or IPoA. Please refer to the Setup section of “Chapter 6: Configuring the Wireless-G ADSL Gateway with SpeedBooster” for details on Internet connection settings.

2.Make sure you have the right cable. Check to see if the Gateway column has a solidly lit ADSL LED.

3.Make sure the cable connecting from your Gateway’s ADSL port is connected to the wall jack of the ADSL service line. Verify that the Status page of the Gateway’s web-based utility shows a valid IP address from your ISP.

4.Turn off the computer and Gateway. Wait 30 seconds, and then turn on the Gateway, and computer. Check the Status tab of the Gateway’s web-based utility to see if you get an IP address.

4.I am not able to access the Setup page of the Gateway’s web-based utility.

•Refer to “Problem #2, I want to test my Internet connection” to verify that your computer is properly connected to the Gateway.

1.Refer to “Appendix C: Finding the MAC Address and IP address for Your Ethernet Adapter” to verify that your computer has an IP Address, Subnet Mask, Gateway, and DNS.

2.Set a static IP address on your system; refer to “Problem #1: I need to set a static IP address.”

Appendix A: Troubleshooting

65

Common Problems and Solutions

Page 71 Page 73
Page 72
Image 72
Cisco Systems WAG54GS (EU) manual Wireless-G Adsl Gateway with SpeedBooster
Page 71 Page 73

WAG54GS (EU) specifications

The Cisco Systems WAG54GS (EU) is a versatile and robust integrated broadband gateway designed to meet the growing demands of home and small office environments. This device combines both routing and DSL modem functionalities, allowing users to connect multiple devices to the internet seamlessly. Its compact design and user-friendly interface make it an ideal solution for users seeking a reliable internet connection with minimal setup.

One of the standout features of the WAG54GS is its dual-band wireless capabilities, allowing it to operate on both the 2.4 GHz and 5 GHz frequency bands. This flexibility provides users with the option to connect a variety of wireless devices while minimizing interference from other electronic devices. The router complies with the 802.11g wireless standard, offering speeds of up to 54 Mbps, making it suitable for tasks such as web browsing, file sharing, and streaming media.

The WAG54GS also features a built-in 4-port Ethernet switch, enabling users to connect wired devices directly for a more stable and consistent internet connection. This is particularly useful for bandwidth-intensive applications where a wired connection is preferred. In addition, the device supports Quality of Service (QoS) settings, allowing users to prioritize traffic for certain applications, ensuring smooth performance for voice and video calls.

Security is a significant consideration in the design of the WAG54GS, with several features to protect the network from unauthorized access. It incorporates WPA and WPA2 encryption protocols, ensuring data is transmitted securely over the wireless network. Additionally, the built-in firewall protects against external threats, while the ability to create a demilitarized zone (DMZ) allows users to isolate certain devices for additional security.

The setup process for the WAG54GS is straightforward, thanks to its web-based interface, enabling users to configure settings easily. The device also includes a wizard that guides users through the initial configuration process, making it accessible even for those who may not be tech-savvy.

In conclusion, the Cisco Systems WAG54GS (EU) is an ideal choice for users seeking a reliable and easy-to-use broadband gateway. Its combination of wireless and wired connectivity, robust security features, and user-friendly setup make it a solid investment for enhanced internet access in home and small office setups.
Top Page Image Contents