Wireless-G ADSL Gateway with SpeedBooster

3.Refer to “Problem #10: I am a PPPoE user, and I need to remove the proxy settings or the dial-up pop- up window.”

5.I can’t get my Virtual Private Network (VPN) working through the Gateway.

Access the Gateway’s web interface by going to http://192.168.1.1 or the IP address of the Gateway, and go to the Security tab. Make sure you have IPsec passthrough and/or PPTP pass-through enabled.

•VPNs that use IPSec with the ESP (Encapsulation Security Payload known as protocol 50) authentication will work fine. At least one IPSec session will work through the Gateway; however, simultaneous IPSec sessions may be possible, depending on the specifics of your VPNs.

•VPNs that use IPSec and AH (Authentication Header known as protocol 51) are incompatible with the Gateway. AH has limitations due to occasional incompatibility with the NAT standard.

•Change the IP address for the Gateway to another subnet to avoid a conflict between the VPN IP address and your local IP address. For example, if your VPN server assigns an IP address 192.168.1.X (X is a number from 1 to 254) and your local LAN IP address is 192.168.1.X (X is the same number used in the VPN IP address), the Gateway will have difficulties routing information to the right location. If you change the Gateway’s IP address to 192.168.2.1, that should solve the problem. Change the Gateway’s IP address through the Setup tab of the web interface.

•If you assigned a static IP address to any computer or network device on the network, you need to change its IP address accordingly to 192.168.2.Y (Y being any number from 1 to 254). Note that each IP address must be unique within the network.

•Your VPN may require port 500/UDP packets to be passed to the computer that is connecting to the IPSec server. Refer to “Problem #7, I need to set up online game hosting or use other Internet applications” for details.

•Check the Linksys international website for more information at www.linksys.com/international.

6.I need to set up a server behind my Gateway and make it available to the public.

To use a server like a web, ftp, or mail server, you need to know the respective port numbers they are using. For example, port 80 (HTTP) is used for web; port 21 (FTP) is used for FTP, and port 25 (SMTP outgoing) and port 110 (POP3 incoming) are used for the mail server. You can get more information by viewing the documentation provided with the server you installed.

•Follow these steps to set up port forwarding through the Gateway’s web-based utility. We will be setting up web, ftp, and mail servers.

1.Access the Gateway’s web-based utility by going to http://192.168.1.1 or the IP address of the Gateway. Go to the Applications and Gaming => Port Range Forwarding tab.

2.Enter any name you want to use for the Customized Application.

3.Enter the External Port range of the service you are using. For example, if you have a web server, you would enter the range 80 to 80.

4.Check the protocol you will be using, TCP and/or UDP.

5.Enter the IP address of the computer or network device that you want the port server to go to. For example, if the web server’s Ethernet adapter IP address is 192.168.1.100, you would enter 100 in the

Appendix A: Troubleshooting

66

Common Problems and Solutions

Page 72 Page 74
Page 73
Image 73
Cisco Systems WAG54GS (EU) manual Wireless-G Adsl Gateway with SpeedBooster
Page 72 Page 74

WAG54GS (EU) specifications

The Cisco Systems WAG54GS (EU) is a versatile and robust integrated broadband gateway designed to meet the growing demands of home and small office environments. This device combines both routing and DSL modem functionalities, allowing users to connect multiple devices to the internet seamlessly. Its compact design and user-friendly interface make it an ideal solution for users seeking a reliable internet connection with minimal setup.

One of the standout features of the WAG54GS is its dual-band wireless capabilities, allowing it to operate on both the 2.4 GHz and 5 GHz frequency bands. This flexibility provides users with the option to connect a variety of wireless devices while minimizing interference from other electronic devices. The router complies with the 802.11g wireless standard, offering speeds of up to 54 Mbps, making it suitable for tasks such as web browsing, file sharing, and streaming media.

The WAG54GS also features a built-in 4-port Ethernet switch, enabling users to connect wired devices directly for a more stable and consistent internet connection. This is particularly useful for bandwidth-intensive applications where a wired connection is preferred. In addition, the device supports Quality of Service (QoS) settings, allowing users to prioritize traffic for certain applications, ensuring smooth performance for voice and video calls.

Security is a significant consideration in the design of the WAG54GS, with several features to protect the network from unauthorized access. It incorporates WPA and WPA2 encryption protocols, ensuring data is transmitted securely over the wireless network. Additionally, the built-in firewall protects against external threats, while the ability to create a demilitarized zone (DMZ) allows users to isolate certain devices for additional security.

The setup process for the WAG54GS is straightforward, thanks to its web-based interface, enabling users to configure settings easily. The device also includes a wizard that guides users through the initial configuration process, making it accessible even for those who may not be tech-savvy.

In conclusion, the Cisco Systems WAG54GS (EU) is an ideal choice for users seeking a reliable and easy-to-use broadband gateway. Its combination of wireless and wired connectivity, robust security features, and user-friendly setup make it a solid investment for enhanced internet access in home and small office setups.
Top Page Image Contents