9
Chapter 4: Setting up the Wireless-B Media Adapter
Overview
Wireless-B Media Adapter
Chapter 4: Setting up the Wireless-B Media Adapter
Overview
This chapter will describe the Wireless-B Media Adapter Setup Wizard, which will guide you through the
installation and configuration procedure. When you run the Setup Wizard for the first time, you will be asked to
install the Wireless-B Media Adapter Utility on your PC, which may also be referred to as the host computer. You
must install the Adapter Utility so your PC can send music and pictures to the TV and stereo via the Adapter.
If you want to set up the Adapter using your TV (without running the Setup Wizard on a PC), then go to “Chapter 5:
Connecitng the Wireless-B Media Adapter to Your TV and Stereo.”

Running the Setup Wizard

1. Insert the Setup CD-ROM into your PC’s CD-ROM drive. The Setup Wizard should run automatically, and Figure
4-1 should appear. If it does not, click the Start button and choose Run. In the field that appears, enter
D:\setup.exe (where “D” is the letter of your CD-ROM drive).
•Setup - Click the Setup button to begin the installation process.
•Install Utility on PC - Click the Install Utility on PC button to install the Adapter’s Utility on your PC.
•User Guide - Click the User Guide button to open the PDF file of this User Guide.
•LINKSYS Web - Click the LINKSYS Web button to visit the Linksys website, www.linksys.com.
•Exit - Click the Exit button to exit the Setup Wizard.
2. To install the Adapter, click the Setup button on the Welcome screen.
3. The screen shown inFigure 4-2 will appear. Ifyou are using the Adapter for the first time, click Installto install
the Adapter Utility on your PC. (This Utility will enable your PC to send digital pictures and music files to the
Adapter.) If you have already installed the Adapter Utility on your PC, click Skip and proceed to step 9. Figure 4-2: Installing the Adapter Screen
Figure 4-1: Welcome Screen
Note: Before you can use the Adapter, you must install the Adapter Utility on your Windows 2000 or
XP PC, so your PC will be able to communicate with the Adapter.