Cisco Systems WMA11B manual Using the TV Setup, Installing the Adapter Utility

Wireless-B Media Adapter

Using the TV Setup

Before setting up the Adapter using the TV, decide whether the Adapter will be connected to your wireless or wired network AFTER you have configured it. For more information, refer to “Appendix C: Planning Your Use of the Wireless-B Media Adapter.”

To set up the Adapter using the TV, first you have to install the Adapter Utility on your PC. Follow the instructions in the “Installing the Adapter Utility” section.

Installing the Adapter Utility

1.Insert the Setup CD-ROM into your PC’s CD-ROM drive. The Setup Wizard should run automatically, and Figure 5-6 should appear. If it does not, click the Start button and choose Run. In the field that appears, enter D:\setup.exe (where “D” is the letter of your CD-ROM drive).

2.To install the Adapter Utility, click the Install Utility on PC button on the Welcome screen.

3.If the latest Windows Installer components are not detected on your PC, then you will see Figure 5-7, which will ask you to update them. Click Next.

After these components are updated, you will be asked to reboot your PC. Click Yes. After the PC reboots, you see the screen shown in Figure 5-8. Click Next and proceed to step 4.

Chapter 5: Connecting the Wireless-B Media Adapter to Your TV and Stereo

Figure 5-6: Welcome Screen

Figure 5-7: Windows Installer Screen

Figure 5-8: Installing the Adapter Utility

Screen

22

Using the TV Setup