12
Chapter 4: Setting up the Wireless-B Media Adapter
Running the Setup Wizard
Wireless-B Media Adapter
9. If you are setting up the Adapter using a wireless-equipped computer, click Next when you see the screen
shown in Figure 4-8. If you are setting up the Adapter using a wired computer, make sure the Adapter’s
Ethernet LED is solidly lit. This indicates that the Adapter is properly connected to your wired network. Then
click the Next button to continue.
10. The screen shown in Figure 4-9 displays a list of Wireless-B Media Adapters that have been found on your
network, along with the settings for the Adapter whose name is highlighted. To select the Adapter you are
currently installing, click its name in the Adapters Found box. Then click the Next button.
Figure 4-8: Connection for Setup Screen
Figure 4-9: Adapter Selection Screen