Pantech WV-NW474S manual Network Setup Parameters vs. Connection Type, Connection type

Models: WV-NW474S

1 58
Download 58 pages 53.63 Kb
Page 22
Image 22
■Network Setup Parameters vs. Connection Type

Network Setup Parameters vs. Connection Type

Connection type

Item

Parameter description

Connection type 1

IP address

Enter "192.168.0.XXX" (where XXX should be a number from 2 to

 

 

254 except the same IP addresses already assigned to the PC or

 

 

any other cameras).

 

 

 

 

Net mask

Use the default setting "255.255.255.0" for the subnet mask.

 

 

 

 

Default gateway

192.168.0.1

 

 

 

 

Host name

NW_Camera

 

 

 

 

Network speed

Select the network speed by pressing the [o] button.

 

 

Selectable parameters: Auto (default setting), 100 Mbps (full

 

 

duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10 Mbps

 

 

(half duplex) Using Auto is recommended.

 

 

 

 

HTTP port

Use the default setting "80" for the HTTP port.

 

 

 

 

DHCP

Click OFF.

 

 

 

 

DNS

Click OFF.

 

 

 

 

Primary DNS

0, 0, 0, 0

 

 

 

 

Secondary DNS

0, 0, 0, 0

 

 

 

 

DDNS

Click OFF.

 

 

 

 

Host name

None

 

 

 

 

User name

None

 

 

 

 

Password

None

 

 

 

 

Access interval

None

 

 

 

Connection type 2

IP address

Enter the IP address assigned by your network administrator.

 

 

The setting is not required if DHCP is used in an intranet.

 

 

 

 

Net mask

Enter the Net mask assigned by your network administrator.

 

 

The setting is not required if DHCP is used in an intranet.

 

 

 

 

Default gateway

Enter the IP address of the default gateway assigned by your net-

 

 

work administrator.

 

 

The setting is not required if DHCP is used in an intranet.

 

 

 

 

Host name

Contact your network administrator and enter the assigned host

 

 

name if required.

 

 

 

 

Network speed

Select the network speed by pressing the [o] button.

 

 

Selectable parameters: Auto (default setting), 100 Mbps (full

 

 

duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10 Mbps

 

 

(half duplex) Using Auto is recommended.

 

 

 

 

HTTP port

Use the default setting "80" for the HTTP port.

 

 

 

 

DHCP

Click ON if the intranet uses DHCP.

 

 

 

 

DNS

Click ON when using the DNS server.

 

 

 

 

Primary DNS

0, 0, 0, 0

 

 

 

 

Secondary DNS

Enter the IP address of DNS when using the DNS server.

 

 

Contact your Internet service provider for the IP address of DNS.

 

 

Primary and secondary IP addresses can be set for the DNS.

 

 

 

 

DDNS

Click ON when using DDNS function.

 

 

 

 

Host name

Ask your administrator

 

 

 

 

User name

Ask your administrator

 

 

 

 

Password

Ask your administrator

 

 

 

 

Access interval

Ask your administrator

 

 

 

-22-

Page 22
Image 22
Pantech WV-NW474S manual Network Setup Parameters vs. Connection Type, Connection type, Parameter description