Pantech WV-NW474S manual Connection type, Parameter description

Connection type	Item	Parameter description
Connection type 3	IP address	Enter the IP address assigned by your Internet service provider.
		The setting is not required if your Internet service provider uses a
		DHCP server (the DHCP server assigns an IP address to the
		camera automatically).
	Subnet mask	Enter the Net mask assigned by your Internet service provider.
		The setting is not required if your Internet service provider uses a
		DHCP server (the DHCP server assigns an IP address to the
		camera automatically).
	Default gateway	Enter the default gateway assigned by your Internet service
		provider.
	Host name	Contact your Internet service provider and enter the assigned
		host name if required.
	Network speed	Select the network speed by pressing the [o] button.
		Selectable parameters: Auto (default setting), 100 Mbps (full
		duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10 Mbps
		(half duplex) Using Auto is recommended.
	HTTP port	Use the default setting "80" for the HTTP port.
	DHCP	Click ON if your Internet service provider uses a DHCP server
		(DHCP server assigns an IP address to the camera automatical-
		ly).
	DNS	Click ON when using the DNS server.
	Primary DNS	0, 0. 0. 0
	Secondary DNS	Enter the IP address of DNS when using the DNS server.
		Contact your Internet service provider for the IP address of the
		DNS. Primary and secondary IP addresses can be set for the
		DNS.
	DDNS	Click ON when using DDNS function.
	Host name	Ask your administrator
	User name	Ask your administrator
	Password	Ask your administrator
	Access interval	Ask your administrator
Connection type 4	IP address	The setting differs depending on the setting of the router as fol-
		lows:
		If the router does not use DHCP: No setting required
		If the router uses DHCP: The router needs to be assigned a pri-
		vate IP address. This IP address must be different from the IP
		addresses already assigned to the PC and other cameras.
		For further information, refer to the operating instructions of the
		router.
	Net mask	The setting differs depending on the setting of the router as fol-
		lows:
		If the router uses DHCP: No setting required
		If the router does not use DHCP: Setting of the net mask is
		required.
		For further information, refer to the operating instructions of the
		router.
	Default gateway	The setting differs depending on the setting of the router as fol-
		lows:
		If the router uses DHCP: No setting required
		If the router does not use DHCP: The router needs to be
		assigned a private IP address.
		For further information, refer to the operating instructions of the
		router.

-23-