Pantech WV-NW474S manual Prevention Of Blooming And Smear, Specifications, Network Section

Models: WV-NW474S

1 58
Download 58 pages 53.63 Kb
Page 55
Image 55
PREVENTION OF BLOOMING AND SMEAR

PREVENTION OF BLOOMING AND SMEAR

When the camera is aimed at a bright light, such as a spotlight, or a surface that reflects bright light, smear or blooming may appear. Therefore, the camera should be operated carefully in the vicinity of extremely bright objects to avoid smear or blooming.

Smear

Bright object

Blooming

SPECIFICATIONS

Network Section

Image resolution

640x480, 640x240, 320x240, 160x120 pixel

Image process

JPEG (Super Fine/Fine/Normal/Low image quality selectable)

Image refreshing rate

Fast/Middle/Slow/Very Slow

Traffic control

32 kbps, 64 kbps, 128 kbps, 256 kbps, 512 kbps, 1 024 kbps, Unlimited

Protocols supported

TCP/IP, HTTP, FTP, SMTP, DNS, DDNS, DHCP, ARP, BOOTP, NTP

OS applicable

Windows 98 SE, Windows NT WORKSTATION 4.0 Service Pack6a, Windows

 

2000 Professional Service Pack2, Windows ME, or Windows XP

 

 

Applicable browsers

Internet Explorer 5.5, 5.5 SP2, 6.0, or Netscape Communicator 4.73, 4.78

Camera Section

 

 

 

Pick-up Device:

768 (H) x 494 (V) pixels, Interline Transfer CCD

 

 

Scanning Area:

4.8 (H) x 3.6 (V) mm (Equivalent to scanning area of 1/3” pick-up tube)

Scanning:

525 lines/60 fields/30 frames

Horizontal:

15.734 kHz

Vertical:

59.94 Hz

Synchronization:

Internal, Line-lock or multiplexed vertical drive (VD2) Sync selectable

Video Output:

1.0 V[p-p] NTSC composite 75 /BNC connector

Horizontal Resolution:

480 lines (C/L), 570 lines (B/W)

Signal-to-Noise Ratio:

50 dB (Equivalent to AGC Off, weight On, AP On)

Dynamic Range:

48 dB (Typ)

Minimum Illumination:

2.0 lx (0.2 footcandle) (WIDE) (C/L),

 

0.2 lx (0.02 footcandle) (WIDE) (B/W)

 

When the optional WV-CW1CE dome cover is installed.

 

0.8 lx (0.08 footcandle) (WIDE) (C/L), 0.1 lx (0.01 footcandle) (WIDE) (B/W)

Gain Control:

ON (DNR-H), ON (DNR-L) or OFF (SET UP MENU) selectable

White Balance:

ATW1, ATW2 or AWC (SET UP MENU) selectable

Aperture:

Set Variable (SET UP MENU)

Super Dynamic2:

ON or OFF (SET UP MENU) selectable

Electronic Shutter Speed:

OFF, 1/100, 1/250, 1/500, 1/1 000,1/2 000, 1/4 000, 1/10 000 s selectable

Lens

 

Focal length:

3.8 mm - 8 mm

Maximum aperture ratio:

1:1.4 (Wide), 1:1.8 (Tele)

Angular field of view:

Horizontal: 35.6 ° - 73.6 °

 

Vertical: 26.6 ° - 53.4 °

Focusing range:

1.2 m - (3.9 ft - )

Control Function:

Alarm In: Pulled-up to 5 V DC,

 

OFF (Open or 2 V DC – 12 V DC)/ ON (0 V 0.4 mA, 100 ms)

 

Alarm Out: Collector-output,

 

OFF (Open or 4 V DC – 5 V DC)/ ON (1 V 50 mA) Pulse/Latch selectable

 

 

-55-

Page 55
Image 55
Pantech WV-NW474S manual Prevention Of Blooming And Smear, Specifications, Network Section, Camera Section