INSTALLATION
■Installation Plans & Preparations
An example of flush mounting is shown. This example shows two boxes: one is for camera mounting and the other is for cable junction.
The supplied
On the bottom of the bracket, there are four 6.5 mm screw holes and six 5.5 mm holes. Use the appropriate holes matching to the installation surface.
85
|
| 4.4 (3/16") |
|
|
|
| |
|
| ||
7 (9/32") | |||
85 | 83.5 | 55 | 175φ |
|
|
|
Bracket Center
Cable Access Hole φ27
46 mm
ø5.5 mm (7/32") | 83.5mm | |
|
|
Bracket fixing screw x4 (Procured locally)
1.Procurement
•Four screws
Locally procure four bracket fixing screws suitable for the installation surface and structure of the wall/ceiling or junction box.
•Junction box
When planning to use a junction box(s), procure one
locally that meets the dimensions in the figure.
An example of surface mounting is shown.
2. Installation space
| 46 mm | |
| ||
Bracket center | ø27 mm | |
| ||
| Cable access | |
Cable access hole | hole |
Prepare a space on the surface measuring ø175 mm or more.
3. Cable route |
• When routing cables through the wall/ceiling, drill a |
ø5.5 mm (7/32")
Bracket fixing screw x4 (Procured locally)
7 mm (1/4) | 83.5 mm |
55
Sideway cable exit
hole as shown in the figure. |
• When routing cables sideways, open the sideway |
cable exit unscrewing the lid with a hexagon |
wrench. |