Pantech WV-NW474S manual Network Connection Types, Direct Connection to PC Type, Necessaries

■Network Connection Types

Prior to connections, specify the connection type and prepare relevant devices and cables.

Notes:

•We recommend that you use connection type 1 or type 2 when setting up the network address of the camera.

•Be sure to unplug or switch all the devices off, then start connections.

●Direct Connection to PC (Type 1)

Use a cross-type network cable in the category 5 to connect the camera directly with the PC.

●Connection to Internet (Type 3)

The PC accesses the camera through the Internet and the DSL/CATV modem.

DSL/CATV Modem

Internet

Network Cable

(Straight type)

PC

(16 clients maximum)

Network Cable (Cross type)

PC

Necessaries: Cross-type network cable (Category 5)

●Connection to Intranet (Type 2)

A switching hub connected to the intranet is placed between the camera and the PC.

Switching Hub

Network Cable

(Straight type)

Network Cable

(Straight type)

PC

(16 clients maximum)

Necessaries:

•Straight-type network cable (Category 5)

•Switching hub or router (10BASE-T/100BASE-TX applicable)

Necessaries:

•Straight-type network cable (Category 5)

•CATV modem (cable modem) or DSL modem

●Connection to Internet (Type 4)

A switching hub or a router may be added to type 3 connection.

Switching Hub or Router

Internet

Network Cable
	DSL/CATV Modem
(Straight type)

PC

(16 clients maximum)

Necessaries:

•Straight-type network cable (Category 5)

•CATV modem (cable modem) or DSL modem

•Switching hub or router (10BASE-T/100BASE-TX applicable)

Notes:

•Setting the router is required when connecting more than one camera. Refer to the manual included with the router.

•The camera does not support the PPPoE. Use a router that handles PPPoE when connecting the camera using that protocol.

•A global-type IP address is required when connect- ing via the Internet.

-15-