Connection type | Item | Parameter description |
| Host name | Contact your Internet service provider and enter the assigned |
|
| host name if required. |
|
|
|
| Network speed | Select the network speed by pressing the [o] button. |
|
| Selectable parameters: Auto (default setting), 100 Mbps (full |
|
| duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10 Mbps |
|
| (half duplex) Using Auto is recommended. |
|
|
|
| HTTP port | If two or more cameras are connected, each camera needs to be |
|
| set up individually. |
|
| The port numbers already assigned to other hardware are not |
|
| available. |
|
| The following are already assigned to the camera. |
|
| Port numbers: 20, 21, 23, 25, 53, 67, 68, 38, 80, 546, 547 |
|
| The following are not usable if the FTP client function is set to |
|
| ON. |
|
| Port numbers: from 4000 to 5000 |
|
| Do not use the same port number set for the Panasonic protocol |
|
| when using the Panasonic Protocol function. |
|
| Do not use the same port number set for NTP when using the |
|
| NTP function. |
|
|
|
| DHCP | Click ON if the router uses DHCP. |
|
|
|
| DNS | Click ON when using the DNS server. |
|
|
|
| Primary DNS | 0, 0, 0, 0 |
|
|
|
| Secondary DNS | Enter the IP address of DNS when using the DNS server. |
|
| Contact your Internet service provider for the IP address of the |
|
| DNS. Primary and secondary IP addresses can be set for the |
|
| DNS. |
|
|
|
| DDNS | Click ON when using the DDNS function. |
|
|
|
| Host name | Ask your administrator |
|
|
|
| User name | Ask your administrator |
|
|
|
| Password | Ask your administrator |
|
|
|
| Access interval | Ask your administrator |
Do not use 0 and 255 for "nnn" part of IP addresses (xxx.yyy.zzz.nnn) such as "xxx.yyy.zzz.0" nor "xxx.yyy.zzz.255".
