Cisco Systems WSC3560CG8PCSRF Install the SFP Modules

Catalyst 3560-C and 2960-C Switch Getting Started Guide

18

Catalyst 3560-C and 2960-C Switch Getting Started Guide

OL-23802-02

Install the SFP Modules

Some Catalyst 3560-C and 2960-C models have SFP module slots.

For a list of supported modules, see the release notes on Cisco.com. For detailed

instructions on installing, removing, and connecting to SFP modules, see the

documentation that came with the SFP module.

Caution Removing and installing an SFP module can shorten its useful life. Do not remove

and insert SFP modules more often than is absolutely necessary.

Step 1 Grasp the module on the sides, and insert it

into the switch slot until you feel the

connector snap into place.

Step 2 Connect an appropriate cable to the module

port. Connect the other cable end to the other

device.

9

Catalyst 3560-CG

Series

PoE

5678

10

208784

9

Catalyst 3560-CG

Series

PoE

5678

10

208785

Contents

Main Catalyst 3560-C and 2960-C Switch Getting Started Guide About This Guide Box Contents Running Express Setup Page Page Page Page Managing the Switch Device Manager Cisco Network Assistant Command-Line Interface Switch RJ-45 Console Port Switch USB Mini-Type B Console Port Other Management Options Installing the Switch Equipment That You Need Before You Begin Installation Warning Statements On a Desk or Shelf (without Mounting Screws) On a Desk or Shelf (with Mounting Screws) Page Page Connecting to the Switch Ports Connect to the 10/100 and 10/100/1000 Ports Install the SFP Modules Connecting to PoE Devices Verify Port Connectivity In Case of Difficulty Troubleshooting Express Setup Resetting the Switch Accessing Help Online For More Information Obtaining Documentation and Submitting a Service Request