Catalyst
Did you connect the Ethernet cable to the console port instead of to a 10/100/1000 Ethernet port on the switch?
If yes, disconnect the cable from the console port. Then connect the cable to an Ethernet port on the switch and on the PC. Wait 30 seconds before you enter 10.0.0.1 in the browser.
Note The console port is outlined in blue, and the Ethernet port is outlined in yellow.
Did you wait 30 seconds after you connected the switch and the PC before you entered the IP address in your browser?
If not, wait 30 seconds,
Did you enter the wrong address in the browser, or is there an error message?
If yes,
Resetting the Switch
Follow these steps to return your switch to the factory default settings. These are reasons why you might want to reset the switch:
•You installed the switch in your network and cannot connect to it because you assigned the wrong IP address.
•You want to reset the password on the switch.
Caution Resetting the switch reboots the switch.
|
| Catalyst |
|
|
|
|
| ||
|
|
| 21 | |
|
|
|
