Citizen CBM1000II user manual Print Paper Specifications and Print Position, Thermal Paper roll

2.4 Print Paper Specifications and Print Position

ENGLISH

(1) Thermal Paper roll

	Paper width 80 +0/-1			Paper width 58
4	Maximum print area 72	4	2	Maximum print area 54	2

Unit: mm

			Printing surface
ø83 or less	ø18	ø12	60~80 ∝m

(Recommended papers) TF50KS-E2C from Nippon Paper KP50 from Shin-Ohji Paper F230AA or HP220A from Mitsubishi Paper or equivalent

(2) Thermal label sheet (label gap detection) * Only L-Spec.

Printing surface

Base sheet width: 80 +0/-1	Base sheet width: 58 +0/-1
Max. label width: 76	Max. label width: 54
Maximum print area 72	Maximum print area 50
Minimumlabel gap	Approx. 2	Minimumlabel length
	25
4	2
	Approx.

Unit: mm

CAUTION

ø83 or less	ø25~28	65~85 ∝m	µm or less
			60

(Recommended papers) KPT86S/G63BC P22 from Ohji Tac. or equivalent

•A roll paper not complying with the specifications may cause some departure in print tone. Adjust print tone with the DIP switch (see “Setting DIP Switches”).

•Do not paste paper end to the core as it may cause coloration or faint letters if printed documents are exposed to a particular chemical or oil afterwards.

•Rubbing the document surface with your nail or metallic device may cause coloration.

•Coloration occurs at a temperature of around 70°C or above. Keep documents away from heat, moisture, or light.

— 12 —