Citizen CBM1000II user manual Selection of character code tables Baud rate, Code Baud rate

4.2.2 DIP switch 2

No.	Function	ON	OFF	Factory presetting	ENGLISH
2-1				OFF*
2-2
	Character code (See the table below.)			OFF*
2-3				OFF*
2-4				OFF*
2-5	Unused	–	–	OFF
2-6	Condition for BUSY to	Reception buffer full	Off-line and reception	OFF
	occur		buffer full
2-7	Paper	Thermal label paper	Thermal paper	OFF
2-8	Detection	Black mark	Label interval	OFF
2-9	Label length set	Command	Auto	OFF
2-10	Label Peeler	Available	Not available	OFF

* Depends on destinations.

4.2.3 DIP switch 3

No.	Function	ON	OFF	Factory presetting
3-1	Bit length	7 bits	8 bits	OFF
3-2	Parity	Available	Not available	OFF
3-3	Odd/even	Even number	Odd number	OFF
3-4	Communication mode	XON/XOFF	DTR/DSR	OFF
3-5	Baud rate (See the table below.)			OFF
3-6				ON
3-7	DSR	Reset	DSR	OFF
3-8	INIT	Reset	—	OFF

* DIP switch 3 is only for the serial interface.

Selection of character code tables							Baud rate
	No.	2-1	2-2	2-3	2-4		No.	3-5	3-6
Code							Baud rate
Code 437 (USA: Standard Europe)		OFF	OFF	OFF	OFF		4,800 bps	OFF	OFF
Katakana (Japanese)		ON	OFF	OFF	OFF		9,600 bps	ON	OFF
Code 850 (Multilingual)		OFF	ON	OFF	OFF		19,200 bps	OFF	ON
Code 860 (Portuguese)		ON	ON	OFF	OFF		38,400 bps	ON	ON
Code 863 (Canadian-French)		OFF	OFF	ON	OFF
Code 865	(Nordic)	ON	OFF	ON	OFF
Code 852	(Eastern Europe)	OFF	ON	ON	OFF	• “Blank page” is an area for user
Code 866	(Russian)	ON	ON	ON	OFF	registration, and is blank (space)
Code 857	(Turkish)	OFF	OFF	OFF	ON	by default.
Windows Code 1252		ON	OFF	OFF	ON	• When “Katakana” is selected, the
Not defined		–	–	–	–	international character is set for
Blank page		ON	ON	ON	ON	Japanese. When the others are
						selected, it is set for USA.

— 23 —