CAUTION
Place the printer on a flat surface.
●Otherwise it may drop off from its position.
Be careful where you place the printer and what is placed near it.
•Take care that a nearby wall or some kind of cloth does not block printer ventilation holes.
•Do not use the printer with any object placed on it.
●Be careful about internal heat buildup, which could cause fire and deform the case.
•Avoid using the printer near a radio or TV set or from supplying it from the same outlet as these appliances.
•For interconnections, use shielded or a twisted pair of cables and ferrite cores, or other
•Avoid using the printer with a device that is a strong source of noise.
●The printer may have an adverse effect on nearby radio or TV transmissions. There may also be cases when nearby electrical appliances adversely influence the printer, causing data errors or malfunction.
Use the printer with its grounding post connected to a convenient grounding facility.
●If leakage occurs electric shock may result.
Do not connect the printer’s grounding post to any of the following facilities:
•Utility gas piping
●A gas explosion could result
•Telephone line ground
•Lightning rod
●If lightening strikes a large surge of current may cause fire or shock
•Utility water pipes
●Plastic water pipes should not be used for grounding. (Those approved by a Waterworks Department may be used.)
Before connecting or disconnecting the grounding lead to or from the printer, always unplug it from supply outlet.
Before connecting or disconnecting the power cord or interconnect cables to or from the printer, always turn the entire system power off. When disconnecting a cable, do not pull out by the cable. Always hold the plug.
Firmly insert the cable plug into its mating socket.
●A cross connection may damage the printer’s internal electronics
or the host system’s hardware.
Only use the printer with devices that have designated solenoid specifications for the drawer
●Neglecting this caution may result in malfunction or failure.
ENGLISH
— 7 —
