1Setup
Part Names and Functions
Sensor Adjustments and Calibration (p.54)
Installing the Media (p.26, p33)
1 |
|
2 |
|
3 | 8 |
| |
5 |
|
7 |
|
4 |
|
6 |
|
1Thermal printhead
This is the printhead. Avoid touching this with your fingertips and leaving grease or dirt on the printhead surface.
2Sensor arm
The media can be installed by raising this arm.
The media can be held in place by lowering this arm.
3Adjustable (rear) sensor
Detects the label or tag position. This sensor is switched “on” by default.
4Fixed media sensor
Alternative method to detect the label or tag position. This sensor is more accurate for small labels as it is closer to the print head. It is switch “off ” by default.
5Left media guide
This is a fixed part of the printer. The left side of the media (labels, tags) as viewed from the from of the printer should be placed against this media guide.
6Right, movable media guide
Slide the right media guide so that it just touches the media. It should “guide” the media through the printer. It should not hold it firmly otherwise the media will jam.
7Platen
Interlocked with the thermal printhead, it feeds media backwards or forwards.
8Adjustable sensor position knob
This is used to change the
14