Citizen CL-S700R, CL-S703 25

Printer Operation

Setting the Media

Installing the Media

1.Push the large blue head-open lever to release the head unit, and then lift the sensor arm by hand as shown below.

Head unit

Sensor arm open lever

Sensor arm

Large blue-head open lever

[Model CL-S700/CL-S703]

2.Firstly, slide the two black plastic parts of the media holder assembly together. Ensure correct alignment of the guide with the bar as it can only be installed in one direction.

Media Sizes (p.23)	3. Slide the roll of media over the media bar. The media guide
	must be on the right side of the roll of media (as viewed from
	the front of the printer) with the flat surface of the media guide
	touching the roll.
	Media holder bar
	Media holder guide