3Printer Adjustments
Adjusting the Ribbon
2.
If a message ‘Ribbon Out’ is shown, set the mark on the feeding section to LOW by turning the
| Winding section |
Feeding section | TENSION |
STANDARD | |
| LOW |
TENSION |
|
STANDARD |
|
LOW |
|
SUPER LOW |
|
3.
If a message ‘Ribbon Out’ is still shown, although Step 2 has been performed, set the mark on the feeding section to SUPER LOW by turning the
| Winding section |
Feeding section | TENSION |
STANDARD | |
| LOW |
TENSION |
|
STANDARD |
|
LOW |
|
SUPER LOW |
|
4.When ribbon is broken during printing
Ribbon may be broken if it is narrow in width and printhead heat temperature is high. In that case, set the mark on the feeding section to SUPER LOW and set the mark on the winding section to LOW by turning
Note: If the problem is still not resolved, please contact our service personnel.
| Winding section |
Feeding section | TENSION |
STANDARD | |
| LOW |
TENSION |
|
STANDARD |
|
LOW |
|
SUPER LOW |
|
60