Appendixes

Replacing the Interface Board

Caution

Always turn off the power to the printer before replacing the interface board. Do not pull it out with unnecessary force. This will cause an accident.

Replacement Method

1.Remove the screws (2) that anchor the bracket of the interface board then pull the interface board towards you. When you do this, be careful not to perform any unreasonable operations that will damage the connecting cable and do not pull the cable too much. If you do, it will cause a malfunction.

Interface Board

Interface Cable

Rear Side

Screw

2.Remove the connecting cable from the interface board and reconnect the cable to the connector of the replacement interface board

Interface Board

Rear Side

Interface Cable

76