ESC G | n |
[Function] | Specifying/canceling Double Printing (ESC G n) |
[Code] | <1B>H<47>H<n> |
[Range] | {0 ≤ n ≤ FF} Data is described in Hex code. |
[Outline] | Specifying/canceling the double printing. |
| • "n" is valid only for the lowest bit (n0). | |||
| • Control by n is shown as follows. | |||
|
|
|
|
|
|
| n0 | Type |
|
|
| 0 | Canceling double printing. |
|
|
| 1 | Specifying double printing. |
|
| This is effective to all characters. | |||
[Caution] | • The print result of Double printing and highlight character printing is completely | |||
|
| same. |
|
|
[See Also] |
| ESC E |
|
|
[Sample Program] |
|
|
|
|
LPRINT CHR$ (&H1B) + "G" + CHR$ (0) ;
LPRINT "AAABBB" + CHR$ (&HA) ;
LPRINT CHR$ (&H1B) + "G" + CHR$ (1) ;
LPRINT "AAABBB" + CHR$ (&HA) ;
[Print Results]
ESC | J | n |
|
|
[Function] |
| Printing and feeding paper n/203 inch | ||
[Code] |
| <1B>H<4A>H<n> | ||
[Range] |
| {0 ≤ n ≤ FF} Data is described in Hex code. | ||
[Outline] |
| Prints data inside the print buffer and feeds paper by n/360 inch. Since an actual | ||
|
|
| mechanical pitch is 1/203 inch, it is internally converted approximate to the value | |
|
|
| specified with this command. | |
|
|
| • Specified volume does not remain. | |
|
|
| • The beginning of the line is to be considered as the next printing start position. | |
|
|
| • Initial value is not defined. | |
[Sample Program] | [Print Results] | |||
See Sample Program and Print Results for ESC 2 on Page 49.
55 | CITIZEN |
