ESC 3 n
[Function] | Setting Line Feed Rate of Minimum Pitch |
[Code] | <1B>H<33>H<n> |
[Range] | {0 ≤ n ≤ FF} Data is described in Hex code. |
[Outline] | The line feed rate per line is specified by n/360 inch. |
| Since an actual mechanical pitch is 1/203 inch, it is internally converted |
| approximate to the value specified with this command. |
[Default] | • The initial value is n = 60 (1/6 inch) (18H), being 4.23 mm line feed rate. |
[Sample Program] | [Print Results] |
| See Sample Program and Print Results for ESC 2 on Page 49. |
50 | CITIZEN |
